What size lug nut is on a Honda Fit?
The standard lug nut size on a Honda Fit is 12mm. This is the size of the threaded fasteners that secure the wheels to the vehicle's hubs. Knowing the correct lug nut size is important for properly maintaining and servicing your Honda Fit.
Understanding Lug Nut Sizes
Lug nuts are the threaded fasteners that hold a vehicle's wheels in place. They come in a variety of sizes, typically ranging from 10mm to 14mm in diameter. The size is determined by the diameter of the threaded portion of the lug nut.
Using the wrong size lug nut can be dangerous, as it may not properly secure the wheel to the vehicle. This could lead to the wheel becoming loose or even detaching while driving, which could result in a serious accident.
Lug Nut Size for the Honda Fit
The Honda Fit, a popular compact car, uses 12mm lug nuts to secure its wheels. This is a common size for many smaller and mid-sized vehicles.
- The 12mm lug nut size is used on all Honda Fit models, regardless of the year or trim level.
- This size is also used on other Honda models, such as the Civic and Accord.
- Knowing the correct lug nut size is important when replacing tires or performing other wheel-related maintenance on your Honda Fit.
Using the wrong size lug nuts can lead to issues with wheel alignment, premature wear, and even the potential for the wheel to come loose while driving. It's crucial to always use the recommended 12mm lug nuts when servicing your Honda Fit.
What size are the lug nuts on a Honda Fit?
Wheel Nut M12-1.50 Acorn – 19mm Hex, 35mm Length. Wheel Lug Nut: M12-1.50 Thread, Radius, Acorn, 1.378″ Length, Chrome (Sold by each)
What size are Honda lug nuts?
The most common Honda wheel nut sizes are: 12×1.5 – Used on many Honda sedan models like Accord, Civic. The nut measures 12mm diameter with a 1.5mm thread pitch. 14×1.5 – Used on models like Honda Odyssey.
What size are the lug nuts on a 2015 Honda Fit?
The Honda Fit comes equipped with 12mm x 1.5 lug nuts from the factory. This size is standard across all Honda Fit models, regardless of the year or trim level.
What size socket fits a lug nut?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size wrench do I need to remove lug nuts?
For lug nuts, a 1/2-inch or even 3/4-inch impact wrench is a better choice.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
Are all car lug nuts the same size?
No. Lug nut sizes depend on the car's manufacturer, & depends on whether that manufacturer uses ASE standard nuts or metric nuts. Common ASE standard nuts are 7/16, 1/2, 9/16, & 5/8 inches.
What size are the lug nuts on a 2010 Honda Fit?
Thread size: M12-1.50.
How to measure nut size?
And width of a nut in inches inches are represented by the double quotes symbol. For example 1 double quotes means 1 inch. It is also common to see nut sizing written as a fraction.
How do I know my lug nut size?
Most manuals will specify the size and type of lug nuts required for the vehicle. But if you don't have access to your owner's manual, you can check the side of the wheel nut to see if the size is imprinted on it. That's most common for nuts that have a chrome cap fitted over the lug nut, but it's a possibility.
