What size lug nuts are on a Honda SUV?
The lug nuts on most modern Honda SUVs are typically M12x1.5 with a 60-degree conical seat, and a 19 mm wrench fits the majority of wheels. However, exact size and thread pitch can vary by model and year, so you should confirm for your specific vehicle.
Honda’s SUV lineup—including the CR-V, HR-V, Passport, and Pilot—spans multiple generations and wheel options. This article outlines the common configurations and how to verify the correct lug nut size for your exact model and wheel setup.
Common lug nut sizes by model
The following reflect sizes commonly seen on recent Honda SUVs. If your wheels differ due to aftermarket parts or unusual trim/wheel choices, sizes may vary.
- Honda CR-V (latest generations): typically M12x1.5 with a 60-degree conical seat; 19 mm wrench; torque generally around 80–100 ft-lbs depending on year and wheel type.
- Honda Pilot: usually M12x1.5, 60-degree cone seat; 19 mm wrench; torque around 80–100 ft-lbs.
- Honda Passport: commonly M12x1.5, 60-degree seat; 19 mm wrench; torque around 80–100 ft-lbs.
- Honda HR-V (modern versions): often M12x1.5, 60-degree seat; 19 mm wrench; torque around 80–100 ft-lbs.
Note: Some older years, trims, or certain wheels may use a different thread pitch (for example, M12x1.25) or a different lug nut seat type. Always verify the exact specification for your vehicle and wheel configuration.
How to verify the correct lug nut size for your vehicle
To confirm the exact lug nut size for your Honda SUV, use these steps:
- Inspect the lug nuts or wheel hub markings for the size (for example, M12x1.5) or a stamped seating type such as 60-degree conical.
- Consult the owner’s manual or the official service data for your specific model/year and wheel type to verify torque and size.
- Check OEM parts databases or ask the dealership with your VIN to obtain the precise lug nut part number and pitch for factory wheels.
After you verify the size, use the correct socket size (most commonly 19 mm for these nuts) and torque to the recommended specification. If you’re using aftermarket wheels, ensure compatibility with the lug nuts provided by the wheel manufacturer.
Torque specs and tool sizes
Typical lug nut torque for modern Honda SUVs falls in the 80–100 ft-lbs range (108–135 Nm), though exact figures can vary by model/year and wheel type. Always follow the specification in your owner's manual or service data, and use the appropriate socket size to avoid damaging nuts or wheels.
Summary
In short, most recent Honda SUVs use M12x1.5 lug nuts with a 60-degree cone seat and usually require a 19 mm socket. Exact sizes can vary by model year and wheel configuration, so always verify with the owner’s manual or OEM data for your vehicle before performing wheel work.
What size are the lug nuts on a 2019 Honda CRV?
The lug nut size for a 2019 Honda CR-V is M12-1.50, with a thread size of 12mm x 1.50mm. You will typically need a 19mm socket to fit these lug nuts. Always double-check your owner's manual or contact a dealer to confirm the correct size for your specific vehicle, as variations can exist.
- Thread Size: M12-1.50 (12mm x 1.50mm)
- Socket Size: 19mm
- Recommendation: Verify with your owner's manual for the most accurate information.
What size socket for 2014 Honda CRV lug nuts?
The 2014 Honda CRV uses a 19mm socket for its lug nuts. These lug nuts have a metric thread size of M12 x 1.5.
- Socket size: 19mm
- Thread size: M12 x 1.5
- Torque spec: 80 to 83.3 ft-lbs (110-130 NM)
What size socket for Honda lug nuts?
What Size Honda Lug Nuts Do I Need?
| Model | Year | Thread/ Socket Size |
|---|---|---|
| Accord | 2003-2020 | 19 mm |
| Civic | 2006-2020 | 19 mm |
| CR-V | 1997-2020 | 19 mm |
| Pilot | 2003-2020 | 21 mm |
What size socket is a 2019 Honda HRV lug nut?
12 mm x 1.50 thread size, 13/16" hex.
