What size lug nuts on Honda Odyssey?
The standard lug nut size for a Honda Odyssey is 12mm. This is the size that Honda recommends for the factory wheels on this popular minivan model.
Understanding Lug Nut Sizes
Lug nuts are the threaded fasteners that secure a vehicle's wheels to the wheel hubs. The size of the lug nuts is an important factor to consider when replacing tires or wheels, as using the wrong size can be unsafe and potentially damage the vehicle.
Lug nut sizes are typically measured in millimeters (mm) and can range from as small as 10mm up to 14mm or more, depending on the make and model of the vehicle. It's crucial to use the correct size specified by the manufacturer to ensure a secure and safe fit.
Lug Nut Size for the Honda Odyssey
According to the information found in the search results, the standard lug nut size for a Honda Odyssey is 12mm. This size is used on the factory wheels that come installed on the Odyssey from the manufacturer.
It's important to always refer to the owner's manual or consult with a Honda dealer or certified mechanic to confirm the correct lug nut size for your specific Odyssey model and year. Using the wrong size lug nuts can lead to wheel separation, which can be extremely dangerous.
Replacing Lug Nuts on a Honda Odyssey
- When replacing lug nuts on a Honda Odyssey, always use the correct 12mm size.
- Ensure that the lug nuts are tightened to the proper torque specification, which is typically between 80-100 ft-lbs for the Odyssey.
- Check the lug nut tightness periodically, especially after the first few miles of driving, to ensure they remain secure.
- If you are unsure about the correct lug nut size or torque specification, consult a Honda dealer or certified mechanic.
Properly maintaining the lug nuts on your Honda Odyssey is crucial for safe and reliable operation of the vehicle. Always use the correct 12mm size and follow the manufacturer's recommendations for tightening and inspection.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
What size are the lug nuts on a 2015 Honda Odyssey?
Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Duplex Acorn, 1.87" Length, Chrome (Sold by each) (Part No. 611-187)
What size socket takes off lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size socket for Honda lug nuts?
To properly remove and install Honda lug nuts, you'll need a socket that matches the nut size. The most common Honda wheel socket sizes are: 19mm – Fits 12×1.5 lug nuts. 22mm – Fits 14×1.5 lug nuts.
How do I know my lug nut size?
Most manuals will specify the size and type of lug nuts required for the vehicle. But if you don't have access to your owner's manual, you can check the side of the wheel nut to see if the size is imprinted on it. That's most common for nuts that have a chrome cap fitted over the lug nut, but it's a possibility.
What size socket is a 2016 Honda Odyssey lug nut?
However, the Odyssey RL6 uses M14x1. 5 lug nuts.
What size are standard lug nuts?
Additionally, under-tightened lug nuts may come loose with time. The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
What size is the lug nut on a Honda Odyssey?
Thread Size: M14-1.50.
What size lug nuts are on a Honda SUV?
The lug nuts on most Honda CR-V models from 1997-2025 are 12×1.5 mm with a torque spec of 80 ft-lbs. This means you'll need a 19mm socket to remove or install the lug nuts.
How to measure nut size?
And width of a nut in inches inches are represented by the double quotes symbol. For example 1 double quotes means 1 inch. It is also common to see nut sizing written as a fraction.
