What size lugs are on a Dodge Charger?

Most Dodge Chargers use lug nuts with a 14x1.5 thread on a 5x115 mm bolt pattern, and a typical 22 mm socket is used to install/remove them.

However, lug hardware can vary with year, trim, and aftermarket wheels, so always confirm for your exact car by checking the owner’s manual or the door placard, and by inspecting your current lug nuts or wheel packaging.

Specs at a glance

Here are the core lug-related specs you’re likely to encounter on stock Chargers.

• Bolt pattern: 5x115 mm (five lug holes on a 115 mm circle).


• Lug thread size: M14x1.5 (14 mm diameter with 1.5 mm pitch).


• Lug nut seat type: 60-degree conical (cone) seat.


• Lug nut hex size: commonly 22 mm across flats (7/8 inch) for the service socket; some trims may use 21–22 mm.


• Notes: These specs cover most modern Chargers from about 2011 to present; aftermarket wheels can require different hardware.

When replacing wheels or lug nuts, ensure you match both the thread size and the seat type to your Charger’s hub and wheel. Using the wrong hardware can damage studs or wheels.

Additional considerations for aftermarket wheels

If you’re using aftermarket wheels, verify the lug requirements with the wheel manufacturer and install hardware specifically rated for those wheels. Aftermarket setups may have different seat types or need different lug lengths, which can affect fit and safety.

How to confirm lug specs for your specific Charger

Use these steps to verify the exact lug size for your exact vehicle configuration, year, and wheel package.

1. Check the vehicle’s owner’s manual and the driver’s door placard for wheel lug specifications (bolt pattern, thread size, and recommended lug hardware).


2. Inspect the lug nuts on the wheels themselves for stamping (e.g., “M14x1.5” or “14x1.5”) or refer to the packaging if they were replaced.


3. Measure the bolt pattern if needed: measure center-to-center distance across opposite lug holes (the 5-lug pattern for Chargers is 115 mm).


4. Consult the wheel manufacturer or a Dodge dealership if you’re using aftermarket wheels to confirm the correct hardware and seat type.


5. Avoid mixing lug sizes or seat types; always use hardware that matches both the wheel and the hub to maintain safety and wheel integrity.

If you’re unsure, a certified tire/wheel shop or a Dodge dealership can quickly confirm the exact lug specs for your specific model and configuration.

Summary

In summary, modern Dodge Chargers commonly use a 14x1.5 lug thread on a 5x115 bolt pattern with 60-degree cone seats, and a 22 mm wrench is typically used to install or remove lug nuts. Always verify against your car’s door placard and owner’s manual, particularly if you’ve added aftermarket wheels, and rely on the wheel manufacturer’s specifications for any non-OEM hardware. This ensures safe installation and proper wheel performance.

What size lug nuts fit a Dodge Charger?

14 mm x 1.50 thread size, 7/8" hex.

What size socket for Dodge Challenger lug nuts?

The correct lug nut socket size for a Dodge Challenger is 13/16 inch or 22mm, which are equivalent. It is recommended to use a 12-point, 6-point socket to avoid damaging the lug nuts. 
Socket size

• 13/16" or 22mm: This is the standard size for both the stock and aftermarket lug nuts. 
• Note: While 13/1613 / 1613/16 inch and $22$mm are often used interchangeably, a $22$mm socket can sometimes feel a bit loose on a 13/1613 / 1613/16 inch nut, or a 13/1613 / 1613/16 inch socket can be tight on a $22$mm nut, depending on the manufacturing tolerances. 

Important tips

• Use a 6-point socket: A 6-point socket provides better grip and is less likely to strip the lug nuts compared to a 12-point socket. 
• Use a non-marring socket: If you are working with rims that you want to protect, consider using a socket with a protective coating to prevent scratches. 
• Apply the correct torque: Always use a torque wrench to tighten the lug nuts to the manufacturer's specification (e.g., 111 ft-lbs for a 2023 Dodge Challenger Hellcat). 

What size are the lug nuts on a 2010 Dodge Charger?

14 mm x 1.50 thread size, 7/8" hex, 1.78" length.

What size are Dodge lug nuts?

The most common Dodge lug nut size is M14x1.5, especially for modern models like the Ram 1500 and Charger. However, older models and certain trucks may use 9/16-18 or 1/2-20. It is essential to check the specific vehicle's requirements, as the size, seat type (such as conical), and hex size can vary.
 
Common lug nut sizes

• M14x1.5: This is the most prevalent size for newer models like the Ram 1500, Charger, and Durango. 
• 9/16-18: Common on older Dodge and Ram trucks from approximately 1994–2011. 
• 1/2-20: Also found on some older vehicles. 

Other important specifications

• Hex Size: The size of the tool needed to tighten the lug nut can vary. Common hex sizes include 7/8" (22mm) and 13/16" (21mm). 
• Seat Type: The lug nut must match the wheel's seat type. A common type for Dodge is the 60-degree conical or acorn seat. 

How to confirm your vehicle's lug nut size

• Consult your owner's manual: The manual will have the most accurate information for your specific vehicle.
• Measure your existing lug nuts: You can measure the diameter and thread pitch of a lug nut you already have. 
• Use an online lookup tool: Many auto parts websites have a tool where you can enter your vehicle's year, make, and model to find the correct lug nuts.