What size socket fits Toyota lug nuts?
The standard size socket that fits Toyota lug nuts is a 21mm socket. This size is commonly used across many Toyota models, including the Camry, Corolla, RAV4, and Tacoma, among others.
Understanding Toyota Lug Nuts and Wheel Sizes
Toyota vehicles typically use lug nuts that require a 21mm socket for removal and installation. This socket size is designed to fit the lug nuts securely and provide the necessary torque to properly secure the wheels. The 21mm size is a common standard across the automotive industry, not just for Toyota models.
It's important to note that while 21mm is the standard, there can be some variations depending on the specific Toyota model and year. Some older Toyota models or specialty trims may use slightly different lug nut sizes, such as 19mm or 22mm. It's always best to consult your owner's manual or check the lug nuts directly to confirm the correct socket size for your vehicle.
Steps to Change a Tire on a Toyota
- Locate the spare tire, jack, and lug wrench that came with your Toyota.
- Loosen the lug nuts on the flat tire, but do not remove them completely.
- Position the jack under the vehicle according to the owner's manual and raise the vehicle.
- Remove the lug nuts and the flat tire, then install the spare tire.
- Tighten the lug nuts in a star or criss-cross pattern, using the 21mm socket.
- Lower the vehicle and double-check that the lug nuts are properly tightened.
Following these steps and using the correct 21mm socket size will ensure your Toyota's wheels are securely fastened and your spare tire is properly installed.
Is 13 16 the same as 21mm?
Standard-to-Metric Conversion Chart
| SAE Sizes | Metric Sizes |
|---|---|
| 25/32" | |
| 20mm | |
| 13/16" | |
| 21mm |
Is 13 16 close to 22mm?
21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch. 24mm = just over 15/16 inch.
Is 22 mm the same as 7 8 of an inch?
22mm = almost 7/8 inch. 23mm = 29/32 inch. 24mm = just over 15/16 inch. 25mm = almost 1 inch.
What size socket is a Toyota Rav4 lug nut?
The lug nut size for a Toyota Rav4 is M12 x 1.5 or hex size is 21 mm. This means that the lug nuts have a diameter of 12 mm, a thread pitch of 1.5 mm, and a hexagonal shape that fits a 21 mm socket or wrench. This lug nut size fits all Toyota Rav4 models from 2007 to 2023.
What size is a Toyota head bolt socket?
TOYOTA HEAD BOLT WRENCHES - DOUBLE HEX 12-point wrenches fit Toyota engine head bolts. 8mm applications include Toyota, Lexus & Scion up to '06. 10mm applications include Toyota, Lexus & Scion '07 and up.
Are all lug nuts 21mm?
The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
What size socket takes off lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size socket fits a 22mm nut?
Size Chart
| Bolt size | Size | Tolerance |
|---|---|---|
| M14 | 22mm | 22.06 |
| 1/2″UNC | 7/8″ | 22.28 |
| 23mm | 23.06 | |
| 1/2″BSW | 23.43 |
What size socket for Toyota lug nuts?
What are Toyota Lug nuts sizes? The lug nuts on a Toyota vehicle are metric and 21mm in size. You can use a 13/16″ socket to fit them, but only if the tin cover is not damaged or bent. The thread size of the lug nuts on a Toyota Camry is M12 x 1.5, and the center hole size is 60.1 mm.
Can I use 7/8 instead of 22mm?
A 7/8" socket will work on a 22mm lug nut, but it can feel a little loose. The other way around, a 22mm can work on a 7/8" lug nut, but it can be really snug, which is not bad.
