What size socket for Toyota Tundra lug nut?
The standard lug nut size for a Toyota Tundra is 21mm. This size socket is required to properly remove and tighten the lug nuts on a Tundra's wheels.
Detailed Explanation
The Toyota Tundra is a full-size pickup truck that has been in production since 2000. Across all model years, the lug nuts used on the Tundra's wheels have a standard size of 21 millimeters (mm). This means that a 21mm socket is the correct tool to use when changing a tire or performing other maintenance that requires removing the lug nuts.
Using the proper 21mm socket is important for a few key reasons:
- Ensures the lug nuts can be fully loosened and tightened to the correct torque specification, which is typically around 100-120 ft-lbs for a Tundra.
- Prevents rounding out or damaging the lug nut heads, which could make them difficult to remove in the future.
- Helps maintain the structural integrity of the wheel assembly and prevents potential safety issues while driving.
It's always a good idea to double-check your owner's manual or consult with a Toyota dealer to confirm the exact lug nut size for your specific Tundra model and year. But in general, the 21mm socket is the standard size that should be used.
Is 13 16 the same as 21mm?
Standard-to-Metric Conversion Chart
| SAE Sizes | Metric Sizes |
|---|---|
| 25/32" | |
| 20mm | |
| 13/16" | |
| 21mm |
What size are the lug nuts on a 2017 Toyota Tundra?
M14x1. 5 Open End Bulge Acorn Locking Lug Nuts (3/4" and 13/16" Hex)
What size socket do I need to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size socket is a Toyota lug nut?
What are Toyota Lug nuts sizes? The lug nuts on a Toyota vehicle are metric and 21mm in size. You can use a 13/16″ socket to fit them, but only if the tin cover is not damaged or bent. The thread size of the lug nuts on a Toyota Camry is M12 x 1.5, and the center hole size is 60.1 mm.
What size socket for tundra lug nuts?
What is Toyota Tundra Lug Nut Socket Size? The socket size of a 2000-2025 Toyota Tundra lug nut is 13/16″ or 22mm. Sometimes, the lug nut head styles determine the type of lug wrench needed. Most stock Toyota lug nuts are Hex types.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
What size is a Toyota head bolt socket?
TOYOTA HEAD BOLT WRENCHES - DOUBLE HEX 12-point wrenches fit Toyota engine head bolts. 8mm applications include Toyota, Lexus & Scion up to '06. 10mm applications include Toyota, Lexus & Scion '07 and up.
What size socket for tacoma lug nuts?
The socket size of a 2023 Toyota Tacoma lug nut is 13/16″, precisely you would need a 22mm hex socket to fit. Aftermarket lug nuts can add a personalized style to the truck. Usually, they come in a mass variety of colors and styles. You can invest in a new Tacoma M12x1.
Are tundra bolts metric or standard?
Yes, almost all Toyota Tundra bolts are metric. For example, the most common metric thread sizes of Tundra bolts are M12x1. 5mm and M14x1. 5mm.
What size are the wheel nuts on a 2017 Tacoma?
The most common size of the Tacoma lug nuts on a 1995-2023 Toyota Tacoma (N100/N200/N300) is M12x1. 5mm while the thread size of a 2024-2025 Toyota Tacoma N400 lug nut is M14x1.
