What size socket is a 2017 Chevy Cruze lug nut?
The lug nuts on a 2017 Chevy Cruze are typically removed and installed with a 19mm socket (about 0.75 inches). This is the standard size for the factory wheels on most trims. Always verify on your specific vehicle if you have aftermarket wheels or locking lug nuts, which may use a different size.
Understanding lug nut sizing on the Cruze
Even with a common size, verifying the exact lug nut spec for your car helps prevent damage to the nut or wheel. The 19mm size is widely used on Cruze models, but variations can occur with aftermarket wheels or locking hardware. Use the steps below to confirm the correct socket size for your wheels before you work on them.
How to confirm the correct lug nut size
To confirm the exact size for your specific Cruze, use these verification steps:
- Check the owner's manual or the tire/wheel information sticker on the driver’s door jamb for the recommended lug nut size and torque specification.
- Inspect the lug nut head: measure across the flats with a caliper or compare to a known socket to determine which size fits snugly without forcing.
- Look for any locking lug nuts on the wheels and ensure you have the correct key or adapter if present.
Following these steps helps ensure you use the proper socket and avoid damaging the lug nuts or wheels during service.
What to know about aftermarket wheels or locking hardware
Some aftermarket wheels or factory options may use different lug nut sizes or include locking nuts. In those cases, the standard 19mm socket may not fit, and you’ll need the specific nut size or the locking key provided with the wheels. If you’re unsure, contact the dealership or a tire shop to confirm the correct socket size for your setup.
Summary
For most 2017 Chevy Cruze models, a 19mm socket is the correct choice for lug nuts. Always verify on your own car—especially if you have aftermarket wheels or locking lug nuts—by consulting the owner's manual, checking the door jamb sticker, or asking a tire professional. Keeping the right tools on hand ensures safe, proper tire maintenance without damaging components.
