What size socket is a Dodge Charger lug nut?

The standard lug nut size for a Dodge Charger is 19mm. This size is commonly used on many Dodge and Chrysler vehicles, as well as other American-made cars and trucks.

Lug Nut Size for Dodge Charger

The Dodge Charger, a popular muscle car, typically uses 19mm lug nuts to secure the wheels to the vehicle. This size is standard across most Dodge, Chrysler, and other Stellantis (formerly Fiat Chrysler Automobiles) models. The 19mm lug nut size provides the necessary strength and torque to keep the wheels firmly in place, even during high-performance driving.

It's important to use the correct lug nut size when changing a tire or performing wheel maintenance on a Dodge Charger. Using the wrong size can lead to issues such as the wheel becoming loose, which could be dangerous. Always refer to your owner's manual or consult a professional mechanic to ensure you have the right tools and hardware for your specific Charger model.

Why 19mm Lug Nuts?

The 19mm lug nut size is a common choice for many American-made vehicles, including the Dodge Charger, due to several factors:

• Strength and Durability: 19mm lug nuts provide the necessary strength and durability to securely hold the wheels in place, even under high-stress driving conditions.


• Compatibility: This size is widely used across the Dodge, Chrysler, and Stellantis lineups, making it a standardized choice for ease of maintenance and replacement.


• Wheel Design: The 19mm lug nut size is well-suited for the wheel designs and brake components commonly found on Dodge Charger and similar models.

Knowing the correct lug nut size for your Dodge Charger is essential for maintaining the safety and performance of your vehicle. Always use the recommended 19mm lug nuts when servicing your Charger's wheels.

What size are Dodge lug nuts?

The most common Dodge lug nut size is M14x1.5, especially for modern models like the Ram 1500 and Charger. However, older models and certain trucks may use 9/16-18 or 1/2-20. It is essential to check the specific vehicle's requirements, as the size, seat type (such as conical), and hex size can vary.
 
Common lug nut sizes

• M14x1.5: This is the most prevalent size for newer models like the Ram 1500, Charger, and Durango. 
• 9/16-18: Common on older Dodge and Ram trucks from approximately 1994–2011. 
• 1/2-20: Also found on some older vehicles. 

Other important specifications

• Hex Size: The size of the tool needed to tighten the lug nut can vary. Common hex sizes include 7/8" (22mm) and 13/16" (21mm). 
• Seat Type: The lug nut must match the wheel's seat type. A common type for Dodge is the 60-degree conical or acorn seat. 

How to confirm your vehicle's lug nut size

• Consult your owner's manual: The manual will have the most accurate information for your specific vehicle.
• Measure your existing lug nuts: You can measure the diameter and thread pitch of a lug nut you already have. 
• Use an online lookup tool: Many auto parts websites have a tool where you can enter your vehicle's year, make, and model to find the correct lug nuts. 

What size are the lug nuts on a 2016 Dodge Charger?

Notes: Nut. 14 mm x 1.50 thread size, 7/8" hex, 1.78" length. Refer to your owner's manual or wheel manufacturer's guide for correct thread size, seat style, length, hex and torque specifications.

Is a 13/16 socket the same as 21mm?

No, a 13/16 inch socket is not exactly the same as a 21mm socket, but they are very close and often considered interchangeable, as 13/16 inch is approximately $20.65$mm. Because of the small difference, one size may fit a nut or bolt more snugly than the other depending on manufacturing tolerances. The 13/16" socket often provides a tighter fit on many $21$mm lug nuts. 

• 13/16" conversion: 13/1613 / 1613/16 inch is equal to approximately 20.6520.6520.65 mm. 
• 21mm conversion: 212121 mm is equal to approximately 13/1613 / 1613/16 inch, or 0.8270.8270.827 inches. 
• Practical application: While they are theoretically different, many tools and parts manufacturers list them as equivalent, making them effectively interchangeable in practice. 
• Best fit: If you have both a 13/16" and a 21mm socket, it is best to try both to see which one fits the fastener most securely without being too loose or too tight. A tighter fit is generally preferred to avoid rounding the fastener head. 

What size socket for Dodge Charger lug nuts?

The socket size for a Dodge Charger lug nut is typically 7/8 inch (22mm), although some older models or specific wheel types may use 13/16 inch (20.6mm). It's best to use a 7/8 inch socket to be sure, as a 22mm socket and a 7/8 inch socket are very close in size and 7/8 inch is the most common size for modern Chargers. 

• Common size: 7/8 inch or 22mm. 
• Alternative size: 13/16 inch may be found on some factory steel wheels with hub caps. 
• For precision: To ensure the best fit, you can use a 7/8 inch socket, but be aware that a 22mm socket will be a little snug and may cause damage.