What size socket is the lug nut on the Acura ILX?
When it comes to performing routine maintenance or emergency repairs on your Acura ILX, knowing the correct lug nut socket size is essential. Whether you're changing a tire or upgrading your wheels, having the right tools on hand can save you time and frustration. In this article, we’ll discuss the lug nut socket size for the Acura ILX and provide some helpful tips for working with lug nuts.
The Lug Nut Socket Size for the Acura ILX
The standard lug nut socket size for most Acura ILX models is 19mm. This size is commonly used across many Acura vehicles, ensuring a snug fit for removing or tightening the lug nuts. However, it’s always a good idea to double-check your specific model year and trim, as variations can occur depending on aftermarket modifications or special editions.
Tips for Working with Lug Nuts
Handling lug nuts properly is crucial for maintaining the safety and performance of your vehicle. Here are some tips to keep in mind:
- Use the Right Tools: Always use a high-quality socket and a torque wrench to ensure proper tightening. Avoid using tools that could strip or damage the lug nuts.
- Check Torque Specifications: The Acura ILX typically requires lug nuts to be tightened to a torque specification of around 80-100 ft-lbs. Refer to your owner’s manual for the exact figure.
- Inspect Lug Nuts Regularly: Over time, lug nuts can become worn or damaged. Inspect them periodically and replace any that show signs of wear.
- Loosen in a Star Pattern: When removing lug nuts, loosen them in a star pattern to evenly release tension on the wheel. This prevents warping or damage to the wheel hub.
- Re-Torque After Driving: If you’ve recently installed new wheels or tires, re-check the torque on the lug nuts after driving 50-100 miles to ensure they remain secure.
Why Knowing the Correct Socket Size Matters
Using the wrong socket size can lead to stripped lug nuts, damaged tools, or even unsafe driving conditions. By ensuring you have the correct 19mm socket for your Acura ILX, you can perform maintenance tasks efficiently and safely. Additionally, having the right tools on hand can make roadside emergencies much less stressful.
Conclusion
Whether you’re a seasoned DIY mechanic or just starting to learn about car maintenance, knowing the correct lug nut socket size for your Acura ILX is a small but important detail. With a 19mm socket and the right approach, you’ll be well-equipped to handle tire changes and other wheel-related tasks with confidence. If you have any questions or need professional assistance, don’t hesitate to reach out to your trusted auto repair shop.
Frequently Asked Questions
What size are the lug nuts on a 2019 Acura ILX?
Item description from the seller. ILX 2013-2019. LUG NUTS THREAD PITCH: 12x1. 5.
Can I use 7/8 instead of 22mm?
A 7/8" socket will work on a 22mm lug nut, but it can feel a little loose. The other way around, a 22mm can work on a 7/8" lug nut, but it can be really snug, which is not bad.
How do I know my lug nut size?
Most manuals will specify the size and type of lug nuts required for the vehicle. But if you don't have access to your owner's manual, you can check the side of the wheel nut to see if the size is imprinted on it. That's most common for nuts that have a chrome cap fitted over the lug nut, but it's a possibility.
What size are the wheel nuts on Acura TLX?
Wheel Nut M12-1.50 Acorn – 19mm Hex, 35mm Length. Wheel Lug Nut: M12-1.50 Thread, Radius, Acorn, 1.378″ Length, Chrome (Sold by each)
What size socket fits a 22mm nut?
Size Chart
| Bolt size | Size | Tolerance |
|---|---|---|
| M14 | 22mm | 22.06 |
| 1/2″UNC | 7/8″ | 22.28 |
| 23mm | 23.06 | |
| 1/2″BSW | 23.43 |
Is 22 or 7/8 bigger?
It's 22mm since the studs are metric (14x1. 5). HOWEVER, you can use either and be fine as 7/8 is ever so slightly larger than 22mm. The way sockets and wrenches are made inexactly (for lack of a better term), 7/8 socket will fit 22mm and vice-versa.
What size socket do I need for lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
What size wrench do I need to remove lug nuts?
For lug nuts, a 1/2-inch or even 3/4-inch impact wrench is a better choice.
What size are the lug nuts on an Acura?
Dorman – Wheel Lug Nut: M14-1.50 Thread, Flanged, Mag, 1.362" Length, Chrome (Sold by each) (Part No. 611-278)
