What size socket is the oil plug on a 2019 Ford Ranger?
The oil plug on a 2019 Ford Ranger typically uses a 15mm socket. This size is common for many modern vehicles, as it provides the right balance of strength and accessibility for the oil drain plug.
Determining the Oil Plug Socket Size
The oil plug socket size on a vehicle can vary depending on the make, model, and year. For the 2019 Ford Ranger, the oil plug is generally a 15mm size. This is a standard metric socket size used by many automakers for their oil drain plugs.
To confirm the exact size for your 2019 Ford Ranger, you can check the owner's manual or consult with a Ford dealership or certified mechanic. They will be able to provide the specific details for your vehicle's oil plug socket size.
Why the 15mm Socket Size?
- The 15mm size provides enough torque and grip to safely remove and tighten the oil plug without stripping the threads.
- It's a common size that is readily available in most automotive tool kits and garages.
- The 15mm socket is small enough to fit in the limited space around the oil plug, making it easy to access and use.
- This size is used across many different vehicle makes and models, providing consistency for DIY mechanics and professional technicians.
Knowing the correct oil plug socket size is important for properly maintaining your 2019 Ford Ranger. Using the right tool ensures a secure fit and prevents damage to the plug or surrounding components during oil changes.
How to find out oil drain plug size?
Measure Diameter
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.
Where is the drain plug on a Ford Ranger?
Because you will have to remove the driver's side tire. And we will get to that when we get to the filter. Part. So we'll go ahead and start with the actual draining of the oil. First.
What size socket fits an oil drain plug?
3/8-inch
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car's engine to catch all the draining oil.
How much oil does a 2019 Ford Ranger take?
6.2 quarts
Capacity: 6.2 quarts (with filter). After refill check oil level.
What size socket is a 2019 Ford Ranger lug nut?
The most common Ford Ranger wheel nut socket sizes are: 19mm socket for 12mm nuts.
What size is a Ford oil drain plug?
75mm. You can also figure it out on the Internet.
What size are the wheel nuts on a 2019 Ford Ranger?
M12x1. 5 Bulge Acorn Wheel Lug Nut (3/4" Hex - Conical Seat)
What size is the oil drain plug on a Ford Ranger?
Oil Drain Plug size 14mm (9/16)
Does Ford use plastic drain plugs?
Since the oil pans on these vehicles are plastic, they require a plastic drain plug.
What sockets do I need for oil change?
Ratchet and Socket Set
Get a set that includes some metric and SAE sizes, and if you're starting out, a 3/8” drive should do just fine. Ratchets and sockets also come in 1/4, 1/2″, 3/4″, and 1” drives. Many medium sized kits will include ratchets and sockets in 3/8” and 1/2″ drive.
