What size throttle body is a 2012 F150?
The 2012 Ford F150 typically comes equipped with a throttle body that has a diameter of 80 millimeters (mm) or 3.15 inches. This is the standard size for the 3.5L EcoBoost V6 engine and the 5.0L V8 engine options available in the 2012 F150 model year.
Understanding Throttle Body Size
The throttle body is a critical component in the engine's fuel delivery system. It controls the amount of air that enters the engine, which in turn regulates the engine's power output. A larger throttle body allows more air to flow into the engine, resulting in increased power and performance.
The size of the throttle body is typically measured in millimeters (mm) or inches. A larger throttle body, such as an 80mm unit, will allow more air to flow into the engine compared to a smaller 70mm throttle body. This can provide a noticeable increase in engine power and responsiveness.
2012 Ford F150 Engine Options
The 2012 Ford F150 was available with several engine options, each with its own throttle body size:
- 3.5L EcoBoost V6 engine: 80mm throttle body
- 5.0L V8 engine: 80mm throttle body
- 3.7L V6 engine: 70mm throttle body
- 6.2L V8 engine: 90mm throttle body
The most common throttle body size for the 2012 F150 is the 80mm unit, which is found on the popular 3.5L EcoBoost V6 and 5.0L V8 engine options.
Upgrading the Throttle Body
Some 2012 F150 owners may choose to upgrade the throttle body to a larger size, such as a 90mm unit, to further increase engine performance. However, this modification should be carefully considered and performed by a qualified mechanic, as it may require additional engine tuning and modifications to ensure proper operation and avoid potential issues.
What happens if the throttle body is too big?
And yes there's obviously some truth in that but once we go past a certain point, going to a larger throttle body is going to give you no improvement in power and what it can actually introduce is some problems with throttle modulation or airflow modulation which actually will make the car harder to drive.
How much horsepower does a 102mm throttle body add?
The 102mm throttle body upgrade dropped the vacuum present in the inlet tract by 0.29 inches and increased boost pressure by 0.3 psi which equated to an extra 8 hp.
How much does it cost to replace a throttle body on a f150?
The average cost for a Ford F-150 Throttle Body Replacement is between $372 and $439. Labor costs are estimated between $58 and $73 while parts are priced between $314 and $365. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
What are the symptoms of a bad throttle body on a Ford f150?
The common warning signs of a bad throttle body are an illuminated check engine light, reduced engine power, rough idling, stalling, and rare cases of misfires and rough running. Meanwhile, a dirty throttle body will lead to poor acceleration and bad fuel economy.
What is the throttle body on a Ford F150?
The job of the throttle body found on your F150 is quite simple. It allows air to pass from the intake tube into the intake manifold. Basically a cylindrical bore with a plate, a throttle body regulates the amount of air flowing into your engine, and thus, regulates at what speed your engine is turning.
What is the stock throttle body size of Click 150?
32MM PGM-FI THROTTLE BODY (VARIO 125/150 - CLICK 125i/150 - BLADE 125 FI)
What does increasing throttle body size do?
So when we go larger in our throttle body size, we're actually reducing the air velocity for a given airflow so what this can end up doing is hampering our low RPM performance so going larger in an individual throttle body size can give you a small improvement potentially in power but quite often that's going to be at ...
How do I know what size throttle body I need?
From the most basic standpoint, the higher the power output of the test motor, the larger the throttle body required. Upgrading a throttle body already capable of supporting 600 hp with a larger version capable of supporting 700 hp on a 300hp motor will have predictable results.
What is the difference between a 5.0 and a coyote engine?
These 5.0L Coyote engines produced lower emissions, better economy, more power, and less vibration than the old pushrod 302 5.0L engines. The 5.0 coyote engine has evolved over the years into the special variants versions powering some of the most legendary special-edition Mustangs.
What size throttle body is on a 5.0 Coyote?
Mustang GT - 90MM Premium Throttle Body (2011-Present) 5.0L V8. Premium Custom Billet Performance Throttle Body. Ford Mustang GT (2011-Present), S550 Coyote 5.0L V8 including BOSS 302 .
