What size wrench for oil change Honda Accord?
The recommended size wrench for an oil change on a Honda Accord is a 17mm wrench. This size is typically used to remove the oil drain plug on most Honda Accord models, allowing you to drain the old oil and replace it with fresh oil.
Detailed Explanation
Performing an oil change on a Honda Accord is a common maintenance task that most vehicle owners can do themselves. To complete this job, you'll need the right tools, including a 17mm wrench to remove the oil drain plug.
The oil drain plug on a Honda Accord is typically located at the bottom of the oil pan, and it's secured in place with a 17mm bolt. Using the correct size wrench, you can loosen and remove this plug to allow the old oil to drain out of the vehicle.
- The 17mm size is the most common wrench needed for Honda Accord oil changes.
- This size wrench will fit the oil drain plug bolt securely, allowing you to remove it without stripping the threads.
- Once the plug is removed, you can drain the old oil and replace it with the recommended fresh oil and filter.
- After the new oil is added, you'll need to use the 17mm wrench again to tighten the drain plug back in place.
It's important to use the correct 17mm wrench size to avoid any issues during the oil change process. Using the wrong size tool could lead to a stripped drain plug, which would require more extensive repairs. By having the right 17mm wrench on hand, you can complete your Honda Accord oil change quickly and efficiently.
What size socket for Honda oil plug?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine.
What size wrench for Honda oil change?
Many but not all hondas and toyota use the same oil filter tool. It is around 64.3 mm x 14 flute for the common tool. The M31 oil filter wrench it is very heavy duty and all steel also has lots of engagement.
What size is the oil drain plug washer on a Honda?
For the engine oil, it's a “14mm aluminum flat crush washer.” I have a pile of them that measure ID 14.5mm, OD 22mm, height 1.8mm. OD of 20-24mm should be fine, and height of 1.2-2.5mm should be fine.
What type of wrench do you need for an oil change?
First you'll need a ratchet and socket set to remove the oil drain plug, then an oil filter wrench to remove the filter. When choosing an oil filter wrench, try to find one that will match the specific filter and engages the serrations on the end of the oil filter to make the task easier.
What is the wrench on a Honda Accord?
Maintenance Minder™
In your Honda Accord, this symbol looks like an orange wrench, and it works to keep you on top of any recommended service appointments. So when it comes on, its simply alerting you that its time to schedule a maintenance procedure at Norm Reeves Honda Cerritos.
What size socket wrench do I need to change my oil?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What is equivalent to a 14mm wrench?
Wrench Size Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 3/8" | 14mm | 9/16" |
| 7/16" | 16mm | 5/8" |
| 1/2" | 19mm | 3/4" |
| 9/16" | 21mm | 13/16" |
What size is Honda Accord oil drain plug?
2016 Honda Accord Bolt, Plug (18Mm)
Warranty: This genuine part is guaranteed by Honda's factory warranty.
What size wrench for Honda Accord oil drain plug?
Moving back a little bit towards the rear of the vehicle is the oil pan and on the backside of that is the drain plug for the oil pan. I used a 17mm socket and wrench to remove the oil drain plug and drain the oil into a catch pan below.
What is a Honda Accord plug in?
About Accord Plug-in Hybrid
Fitted with a larger battery pack than the conventional Accord Hybrid, the plug-in hybrid version of the Honda Accord can be charged from a dedicated household outlet in three hours. The 6.7 kWh lithium-ion battery is used to feed a 124-kilowatt electric motor.
