What type of bulb is on a 2017 Honda Accord stock?
The stock bulb type on a 2017 Honda Accord depends on trim, but most non-LED models use halogen bulbs for headlights and fog lights; higher trims offer LED or HID headlights with different bulb configurations. For common halogen setups, low beams are often H11, high beams typically 9005, and fog lights usually H11. Exact specifications can vary by market and package, so verify for your specific car.
Headlight bulbs: low beam and high beam
To understand what bulbs you should have in the headlights, review the typical halogen configurations found on many 2017 Accord models. The following list reflects common stock options for non-LED trims.
- Low-beam headlight bulb: H11 (on many halogen-equipped trims; some configurations may differ).
- High-beam headlight bulb: 9005 (HB3) for most halogen headlight setups.
In summary, if your Accord uses halogen headlights, you’re most likely dealing with H11 for the low beams and 9005 for the high beams, though trim-specific variations can occur.
Fog lights and other exterior lighting
The factory fog lights, when equipped on halogen-configured models, typically use a dedicated bulb size. The most common stock choice is the H11, but some trims or regional specifications may use a different size. Always confirm for your exact vehicle.
- Fog light bulb: commonly H11 (verify for your trim; some variants may use other sizes).
Conclusion for exterior lighting: Fog lights are usually H11 on many 2017 Accords with halogen fogs, but exact sizing can vary by package and market, so consult the owner’s manual or inspect the current bulb to be sure.
LED and HID options on higher trims
Higher-end trims or optional packages may feature LED or HID headlights rather than halogen bulbs. In those configurations, the “bulb” is not the same as a replaceable halogen unit, and maintenance may involve entire headlight assemblies rather than swapping a single bulb. If you have LED or HID headlights, follow the specific maintenance guidance from Honda or your dealer.
- LED/HID headlights: use different light assemblies; not typically a single replaceable bulb in the same way as halogen systems.
Bottom line for LED/HID configurations: These trims move beyond the standard H11/9005 halogen bulbs, and replacement procedures differ. Always refer to your vehicle’s documentation for exact parts and steps.
How to confirm the exact bulb type for your car
Because bulb types can vary by trim and region, use these steps to verify the correct specification for your specific vehicle.
- Check the owner's manual under the lighting or bulb replacement section for listed bulb types by location (low beam, high beam, fog light).
- Inspect the bulb in the headlight or fog housing; the bulb base and markings usually indicate the type (e.g., H11, 9005).
- Ask a Honda dealer or use a reputable parts retailer with your VIN or trim information to confirm the exact bulb size.
Concluding note: Verifying with the owner's manual or a parts professional ensures you purchase the correct bulb, as incorrect fitment can affect beam pattern and safety.
Summary
For the 2017 Honda Accord, stock halogen headlights typically use H11 for low beams and 9005 for high beams, with fog lights commonly using H11. Higher trims may feature LED or HID headlights, which use different components and replacement methods. Always confirm the exact bulb type for your specific trim and market by consulting the owner’s manual, inspecting the current bulb, or checking with a dealer or parts supplier.
What kind of bulbs do Honda Accords use?
Honda Accord (2016) Bulb Size Chart
| Headlights (High Beam) (EX, EX-L, LX, LX-S, Sport) | 9005 (HB3) |
|---|---|
| Headlights (Low Beam) (EX, EX-L, LX, LX-S, Sport) | H11 (H8 H9) |
| Reverse Light (Back-Up Light) | T15 (912 921) |
| Brake Light (Rear) | 7443 (7440) |
| Brake Light (Outer) | 7443 (7440) |
Are H11 and H7 bulbs the same?
No, H7 and H11 bulbs are not the same and cannot be used interchangeably because they have different base designs, socket types, and dimensions. The primary differences are their base configuration and the type of application they are designed for; H7 bulbs are often used for both low and high beams, while H11 bulbs are typically for low beams or fog lights.
Key differences between H7 and H11 bulbs
| Feature | H7 | H11 |
|---|---|---|
| Base/Socket Design | PX26d base with two bare prongs | PGJ19-2 base with two encased prongs |
| Application | Low and high beams | Low beams and fog lights |
| Dimensions | Larger diameter (~26 mm) | Smaller diameter (~19 mm) |
| Interchangeability | Not interchangeable with H11 | Not interchangeable with H7 |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_uO8laaSyEo2H9u8PreeO6Ao_184';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
How to find the correct bulb
- Check your owner's manual: This is the most reliable source for the correct bulb type for your vehicle.
- Examine the existing bulb: Take out the old bulb and look for the bulb number printed on its base.
- Use an online bulb finder: Many automotive parts websites have tools that can look up the correct bulb for your specific vehicle.
What type of headlight lamp is in my 2017 Honda Fit?
Fit 2007-2018 for Honda Fit Headlight Bulbs, 9003/H4 High Low Deal Beam and H11/H8/H16 Fog light Halogen Bulbs 300% Brightness High Performance Halogen Bulbs 4PCS.
Which is high beam, 9005 or H11?
The 9005 bulb is typically for high beams, while the H11 bulb is typically for low beams. They have different bases and are not interchangeable because the connectors and housings are not designed to be compatible.
9005 (HB3) high beam
- Purpose: High beam (brights)
- Characteristics: Higher lumen output (around 1700-2100 lm), higher wattage (65W), and a brighter light
- Connector: Features a wider, undivided prong set
H11
- Purpose: Low beam or fog light
- Characteristics: Lower lumen output (around 1350-1700 lm) and lower wattage (55W)
- Connector: Has a smaller, different-shaped base with two prongs that are closer together
