What type of oil does a 2012 Acura use?
The recommended oil type for a 2012 Acura is 0W-20 synthetic motor oil. This lightweight, low-viscosity oil helps improve fuel efficiency and provides optimal lubrication for the engine in your 2012 Acura model.
Detailed Explanation
Acura, the luxury vehicle division of Honda, recommends using 0W-20 synthetic motor oil in their 2012 model year vehicles. This oil specification is designed to meet the unique needs of Acura's engines, providing superior protection and performance.
The "0W-20" designation refers to the oil's viscosity, or thickness. The "0W" means the oil has a very low viscosity when the engine is cold, allowing for easy cold starts and rapid oil circulation. The "20" indicates the oil's viscosity when the engine is at normal operating temperature.
Synthetic motor oils, like the 0W-20 recommended for 2012 Acuras, are engineered to provide several benefits over conventional mineral-based oils:
- Improved Fuel Efficiency: The lower viscosity of 0W-20 synthetic oil reduces engine drag, allowing the engine to operate more efficiently and improving overall fuel economy.
- Enhanced Wear Protection: Synthetic oils contain advanced additive packages that help protect engine components from wear and tear, extending the life of critical parts.
- Better Temperature Performance: Synthetic oils maintain their viscosity and lubricating properties better in both extreme cold and hot temperatures, ensuring reliable performance year-round.
It's important to always use the recommended 0W-20 synthetic motor oil specified by Acura for your 2012 model. Using the wrong oil type can negatively impact engine performance, fuel efficiency, and long-term durability.
What kind of oil does a 2012 Acura take?
The type of oil recommended for your Acura TL depends on the year. If you own a TL between model years 2004-2014, your engine's recommended oil is 5W-20, a fully synthetic oil; if your Acura TL model is even older, from model years 1999-2003, the most versatile and safe oil to use in your engine is 5W-30 synthetic oil.
Can I use 5W30 instead of 5W20 in my Acura MDX?
When sticking with manufacturer recommendation of very low viscosity grade of oils like this, ensure you stick with VERY TOP QUALITY FULL SYNTHETIC oils. Else, use 5W30 Synthetic especially if you drive under high speed and load. Nothing is wrong.
How much oil does a 2012 Acura 2.4 take?
Oil Grade: API*
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.2 quarts (with filter). After refill check oil level. |
| Capacity: | 4 quarts. w/of. After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) Replace the drain plug and washer. |
How much oil does a 2012 Acura MDX take?
4.5 quarts
Capacity: 4.5 quarts (with filter).
How often does an Acura MDX need an oil change?
every 4,000 to 7,500 miles
Below are the recommended Acura MDX maintenance intervals: Tire Replacement: Keep an eye on your tire tread because you'll likely need a new set of tires between 30,000 to 50,000 miles. Oil Change: You should change your oil every three to six months, or every 4,000 to 7,500 miles.
What oil does Acura recommend?
Acura Genuine Motor Oil
Acura recommends using Acura Genuine Motor Oil, sold and available at Acura dealers. If Acura Genuine Motor Oil is not used, conventional motor oil of a premium-grade or an ultimate full synthetic blend may be used and must contain the specified viscosity grade indicated in your Owner's Manual.
