What type of oil does a 2014 Subaru take?
Most 2014 Subaru models use synthetic 0W-20 engine oil for normal operation. Always verify the exact specification in your owner’s manual or on the engine oil cap for your specific model and climate.
Standard oil specification for 2014 Subarus
Subaru manuals generally prescribe a 0W-20 synthetic engine oil as the standard for daily driving. This viscosity supports cold starts, fuel efficiency, and adequate engine protection across the typical 2014 lineup, including popular models such as Impreza, Forester, Outback, Legacy, and Crosstrek.
Here is a quick look at common 2014 Subaru models and the oil specification they call for in the owner's manual:
- Impreza (2014): 0W-20 synthetic engine oil
- Forester (2014): 0W-20 synthetic engine oil
- Outback (2014): 0W-20 synthetic engine oil
- Legacy (2014): 0W-20 synthetic engine oil
- Crosstrek (2014): 0W-20 synthetic engine oil
These models generally share the same requirement, but always confirm with the specific owner's manual because there can be regional variations or updates in maintenance recommendations.
How to verify the correct oil for your Subaru
To ensure you use the correct oil, check both the owner's manual and the oil fill cap on the engine. Subaru typically marks the fill cap with the recommended viscosity (0W-20). You should also follow the vehicle’s maintenance schedule and use only high-quality oil that meets API SN or newer specifications and ILSAC requirements.
Where to find official guidance
Consult your vehicle’s owner's manual, the under-hood oil cap, and the maintenance sticker placed near the engine bay. If in doubt, contact a Subaru dealership or certified mechanic for the exact specification for your country or climate.
Summary
In brief, a 2014 Subaru generally takes synthetic 0W-20 engine oil, with the same specification applying across key models like Impreza, Forester, Outback, Legacy, and Crosstrek. Always confirm with your manual or dealer for your exact trim and regional guidance.
