What type of oil does a 2016 Subaru Crosstrek take?
The Crosstrek uses SAE 0W-20 synthetic engine oil.
Oil specifications for the 2016 Crosstrek
The 2016 Crosstrek, equipped with the 2.0-liter FB20 engine, is designed to run on synthetic engine oil with a grade of 0W-20. This oil should meet API SN or higher and ILSAC GF-5 or newer standards. The engine oil capacity with filter change is about 3.7 quarts (3.5β3.7 quarts depending on variations). Always check the owner's manual for your exact specification and to confirm if maintenance minder requires any schedule differences due to climate or driving conditions.
Key requirements:
- Oil grade: SAE 0W-20 synthetic (full synthetic recommended).
- Certifications: API SN or higher; ILSAC GF-5 or newer.
- Oil capacity: Approximately 3.7 quarts (3.5β3.7 quarts with filter).
- Change interval: Follow Subaru's Maintenance Minder system; typical synthetic oil intervals are longer than conventional oil.
Note: Always verify with the owner's manual for your vehicle's specific climate and service plan, and use oil that carries the Subaru approval or meets the required standards.
Are there alternative options?
While 0W-20 synthetic is the default recommendation, some markets allow using 5W-30 in certain conditions if 0W-20 is unavailable or if local specifications require it. If you must switch, confirm with a Subaru dealer or consult the owner's manual for approved alternatives and any warranty implications.
Concluding paragraph: Adhering to the recommended oil type helps maintain engine performance, fuel economy, and warranty coverage. Always check the Maintenance Minder or manual for interval specifics.
Summary
The 2016 Subaru Crosstrek's engine calls for a full-synthetic 0W-20 oil, with a capacity of about 3.7 quarts. Use API SN or higher and ILSAC GF-5 or newer. Follow the Maintenance Minder for replacement intervals and consult the manual for any climate-related considerations.
What oil does a 2016 Subaru take?
Recommended especially for turbo-charged engines, Genuine Subaru Certified 5W-30 Synthetic Motor Oil provides superior protection against oil breakdown for cleaner running and long engine life. 5W-30 synthetic motor oil is required for 2011 and newer turbo-charged Subaru vehicles.
Can I put 5W-30 instead of 0W20 on my Subaru Outback?
Oil Type & Capacity for Subaru Outback
Also like the Crosstrek, the Outback engine should be filled with 0W-20 synthetic oil. If synthetic oil isn't available, you can use either 5W-30 or 5W-40 conventional oil. However, as suggested above, the engine oil should be replaced with synthetic oil during the next change.
What type of oil does a Subaru Crosstrek use?
The Subaru Crosstrek requires SAE 0W-20 full synthetic oil for models from 2018 through 2025. You should look for oil that has the ILSAC GF-5 certification mark. While other viscosities like 5Wβ305 cap W minus 305πβ30 may be considered for certain conditions or long-term engine protection, it's best to stick with the recommended 0Wβ200 cap W minus 200πβ20 synthetic oil to ensure optimal performance and to avoid potential warranty issues, especially for standard driving conditions.Β
Key recommendations
- Viscosity: SAE 0Wβ200 cap W minus 200πβ20Β
- Oil Type: Full syntheticΒ
- Certification: Look for an ILSAC GF-5 certification mark.Β
- Why this oil? The 0Wβ200 cap W minus 200πβ20 oil is specifically recommended for the fuel efficiency and low-friction design of the Crosstrek's Boxer engine.Β
Important considerations
- Alternative viscosities: Some drivers and mechanics suggest using 5Wβ305 cap W minus 305πβ30 for better protection, especially in hot climates or under heavy use. However, this is a departure from Subaru's official recommendation and could affect your warranty, so check with your dealership first.Β
- Consistency: If you are using a different viscosity than recommended, ensure you use it consistently for the life of the engine and keep up with oil change intervals.Β
- Owner's manual: Always refer to your specific vehicle's owner's manual for the most accurate and up-to-date oil information, as recommendations can vary by model year.Β
What kind of oil does a 2016 Subaru Crosstrek take?
0W-20 synthetic oil
2013β2023 Subaru Crosstrek
From its introduction in 2013 through the 2023 model year, the Subaru Crosstrek consistently requires 0W-20 synthetic oil. This oil provides a balance between fuel efficiency and engine protection across various driving conditions.
