What type of oil does a Toyota 86 take?
The Toyota 86 sports car requires 0W-20 synthetic motor oil. This lightweight, low-viscosity oil helps improve fuel efficiency and provides optimal lubrication for the 86's high-revving Boxer engine.
Detailed Explanation
The Toyota 86 is a rear-wheel-drive sports car developed in collaboration between Toyota and Subaru. It is powered by a 2.0-liter Boxer engine that produces 205 horsepower and 156 lb-ft of torque. To ensure proper lubrication and performance, Toyota specifies the use of 0W-20 synthetic motor oil in the 86.
The "0W-20" designation refers to the oil's viscosity, which determines its thickness and flow characteristics. The "0W" indicates the oil's cold weather performance, allowing it to flow easily during engine startup in cold temperatures. The "20" represents the oil's viscosity at normal operating temperatures.
Synthetic 0W-20 oil was chosen for the Toyota 86 for several reasons:
- Improved Fuel Efficiency: The low-viscosity 0W-20 oil reduces internal engine friction, leading to better fuel economy compared to heavier, higher-viscosity oils.
- Enhanced Lubrication: The synthetic base oil and advanced additive package provide superior lubrication and wear protection for the 86's high-revving Boxer engine.li>
- Optimal Engine Performance: The 0W-20 viscosity helps maintain proper oil flow and pressure, ensuring the engine components are adequately lubricated, even under high-performance driving conditions.
It's important to use the recommended 0W-20 synthetic motor oil in the Toyota 86 to ensure optimal engine protection, performance, and fuel efficiency. Consult your owner's manual or a qualified mechanic for the specific oil change intervals and maintenance requirements for your Toyota 86.
How much is an oil change for a Toyota 86?
The average cost for a Toyota 86 Oil Change is between $117 and $127. Labor costs are estimated between $35 and $44 while parts are priced between $82 and $83. This range does not include taxes and fees, and does not factor in your unique location.
What oil does a Toyota 86 take?
Oil Grade: API*
| Viscosity: | 0W-20 (All TEMPS) - 0W-20 is the best choice for good fuel economy and starting in cold weather. If 0W-20 is not available 5W-20 may be used. However, it must be replaced with 0W-20 at the next oil change. |
|---|---|
| Capacity: | 5.7 quarts (with filter). After refill check oil level. |
Is Toyota 86 quick?
When it comes to acceleration, the GR86 can go from 0 to 60 mph (97 km/h) in about 6.1 seconds. This is a decent acceleration rate for a car in its class, but it may not be as fast as some of its competitors. However, the GR86 makes up for its slightly slower acceleration with its handling capabilities.
What is Toyota recommended oil?
Only Answer. Genuine Toyota motor oil 0W-20 utilizes a Toyota-specific additive package that will provide the best results for oil performance and fuel economy. However, other 0W-20 synthetic oils can be used as long as they are ILSAC certified, which is found on the oil container label.
Can you put 5w30 instead of 0w20?
Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle's engine. Thus, always refer to the manufacturer's recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.
Should I use 5W or 0W oil?
The first number of a multi-grade oil designates the ability for the oil to be pumped and flow at colder temperatures; the “W” stands for winter. Thus, a 0W oil will be able to flow faster and get to critical engine components better than a 5W or a 10W oil; especially in extreme cold conditions and at engine start-up.
What oil does a Toyota 86 use?
Oil Grade: API*
| Viscosity: | 0W-20 (All TEMPS) - 0W-20 is the best choice for good fuel economy and starting in cold weather. If 0W-20 is not available 5W-20 may be used. However, it must be replaced with 0W-20 at the next oil change. |
|---|---|
| Capacity: | 5.7 quarts (with filter). After refill check oil level. |
What kind of oil does a 2013 Toyota 86 take?
According manual Toyota Genuine Motor Oil, oil grade: SAE 0W-20 (preferred) and 5W-30 (but should be replaced with SAE 0W-20 at next change interval) API grade SL "Energy-Conserving", SM "Energy-Convserving", SN "Resource-Conserving" or ILSAC multigrade engine oil.
How much oil does a Toyota 86 take?
4.7 quarts
A 2019 Toyota 86 takes 4.7 quarts of oil. How much oil you should use depends considerably on the type of car, engine size, and type of oil.
What oil should I use for brz?
5W30 Oil For BRZ yes. It is warranty approved deep in the owners manual, but if something happens it will be a headache with the dealer, and usually Subaru dealers are more difficult than Toyota dealers as they deal with the wrx crews warranty claims. I run costco 5w30 synthetic year round in socal in my FA20.
