What type of transmission fluid does a 2005 Chevy Blazer take?
The 2005 Chevy Blazer requires Dexron-III/Mercon automatic transmission fluid. This is the recommended fluid type for the Blazer's 4L60-E four-speed automatic transmission.
Detailed Transmission Fluid Specifications
The 2005 Chevy Blazer is equipped with a 4L60-E four-speed automatic transmission. This transmission was commonly used in various GM vehicles during the early 2000s. The recommended transmission fluid for this gearbox is Dexron-III or Mercon, which are both General Motors-approved automatic transmission fluids.
Dexron-III and Mercon are similar types of transmission fluid that meet the performance requirements for the 4L60-E transmission. They provide the necessary lubrication, friction characteristics, and hydraulic properties to ensure smooth and reliable operation of the transmission. It's important to use the specified fluid type to maintain the transmission's health and prevent any issues.
Fluid Change Interval
GM recommends changing the transmission fluid in a 2005 Chevy Blazer every 30,000 miles or 24 months, whichever comes first. This interval is based on normal driving conditions. If the vehicle is used for towing, hauling heavy loads, or is operated in severe conditions, the fluid should be changed more frequently, around every 15,000 miles.
When changing the transmission fluid, it's crucial to use the correct type and amount of fluid specified by the manufacturer. Overfilling or using the wrong fluid can lead to transmission problems, so it's best to consult the owner's manual or a professional mechanic for the proper procedure and fluid specifications.
What brand of transmission fluid does GM use?
ACDELCO OFFERINGS COVER SEVERAL APPLICATIONS
With that in mind, ACDelco offers a range of high-quality fluids for a variety of transmissions — from automatic to manual to dual clutch — that are designed to keep the gearboxes running smoothly.
What happens if you use the wrong transmission fluid?
Immediately after putting the wrong transmission fluid in your vehicle, you can start noticing issues while driving. In most cases, people notice strange noises, overheating, and slipping gears. Do not ignore these warning signs, because they will not go away on their own.
Does it matter what transmission fluid I use?
So unless you're driving a car that's pushing 40, this isn't the type of ATF for you. Choosing the correct transmission fluid is critical to insuring the maximum performance and fuel economy from your car. Always check your owner's manual for the type of fluid recommended for your vehicle by the manufacturer.
How much transmission fluid do I need to fill up?
In general, transmissions take about 9 to 13 quarts to fill completely. The amount of transmission you add will vary, depending on whether you are draining or replacing it all or you are just topping it up. Again, you should avoid adding too much. It is advisable to put in little amounts at a time.
What kind of ATF does Chevy use?
General Motors recommends Dexron-VI ATF transmission fluid for use in all Chevy Silverado 1500 automatic transmissions.
How much transmission fluid does a 2005 Trailblazer take?
For Automatic Transmission: 4L60-E....AF6
| Notes: | (1) This specification has been updated from Dexron II or III to Dexron VI per a Technical Service Bulletin from the manufacturer |
|---|---|
| Capacity: | 4 speed 4L60-E Total Fill 11.2 quarts. |
| Capacity: | 5 quarts Initial Fill. |
Is ATF the same as Dexron?
DEXRON is the trade name for a group of technical specifications for automatic transmission fluid (ATF) created by General Motors (GM). The name was first registered as a trademark and later evolved into a brand of GM.
What type of transmission fluid does a 4L60E take?
Transmission Fluid
| Manufacturer | Transmission Type | Transmission Fluid |
|---|---|---|
| CHEVROLET | 4L60E | DEXRON III |
| ISUZU | 4L60E | DEXRON III |
| OLDSMOBILE | 4L60E | DEXRON III |
| PONTIAC | 4L60E | DEXRON III |
How much transmission fluid does a 2004 Chevy Blazer take?
5 quarts
Automatic Transmission Fluid
5 quarts Initial Fill.
How many quarts of ATF does a 4L60E take?
For a new installation, the transmission typically requires approximately 12 quarts of transmission fluid. However, if it's simply a fluid change, a 4L60E usually requires around 5 quarts of fluid as some fluid will remain in the transmission even after draining.
