Loading

What year did Ford go to 8x170?

Ford Motor Company transitioned to the 8x170 bolt pattern for its trucks and SUVs in the early 2000s. This change in wheel bolt pattern was part of a broader effort by Ford to standardize and improve the design and performance of its larger vehicle platforms.


The Shift to 8x170 Bolt Pattern


Prior to the early 2000s, Ford trucks and SUVs typically used a 6x135 or 6x139.7 bolt pattern for their wheels. However, in the late 1990s and early 2000s, Ford began migrating its larger vehicle models to an 8-lug 170mm bolt pattern, known as the 8x170.


The key reasons for this change included:



  • Increased load capacity and towing capability for heavier-duty trucks and SUVs

  • Improved wheel and tire stability at higher speeds and under heavy loads

  • Standardization across Ford's truck and SUV lineups for easier parts interchangeability


The 8x170 bolt pattern became the standard for Ford's F-150, F-250, Expedition, Navigator, and other large vehicle models starting in the early 2000s.


Transitioning to the New Bolt Pattern


The switch to 8x170 was a gradual process for Ford, as they phased it in across their truck and SUV product lines over several model years. This allowed Ford to manage the changeover in wheel and hub designs, as well as give customers time to adapt to the new bolt pattern.


Overall, the transition to the 8x170 bolt pattern was an important engineering and manufacturing decision by Ford to enhance the capabilities and performance of its larger vehicle platforms in the early 2000s.

Will a Dodge 8 lug fit a Ford?


No, the Dodge is a 8x165mm bolt pattern and the Ford is 8x170mm. Sell the wheels and buy what you want for your new truck.



What Ford has a 8x170 bolt pattern?


If you have a Ford F250 or F350 from 1999 onward, your wheels will most likely be drilled in the 8x170 bolt pattern. Wheel sizes for these trucks come in a wide range, with 16” to 24” sizes being the most common.



What is the old Ford lug pattern?


Ford F-150 Lug Pattern by Year:
1987-1991 Ford F-150 Lug Pattern: 5×5.50″ (5×139.7mm) 1992-1996 Ford F-150 Lug Pattern: 5×5.50″ (5×139.7mm) 1997-2003 Ford F-150 Lug Pattern: 5×5.31” (5×135mm) 2004-2008 Ford F-150 Lug Pattern: 6×5.31″ (6×135mm)



Does a F250 and F350 have same lug pattern?


Are F250 and F350 Wheels the Same? Yes...for the most part. In general, you can use the same wheels on an F250 as you can on an F350 with a single-wheel rear axle. The wheels for and F250 use the same bolt pattern, offsets, and backspacing as the F350s with a standard SRW rear axle.



Will Ford and Chevy 8 lug rims interchange?


In the truest sense of the question, if you were to take a Chevy 8 lug WHEEL and try to put it onto a Ford or Dodge axle with a different lug pattern, of course it wouldn't fit.



When did Ford change to 8x170 bolt pattern?


Ford changed to 8x170 in 99 for the introduction of the Super Duty bodystyle. Had 1/2-20 studs for 1/2 year, then 14x2mm a couple years , then 14x1. 5mm fine thread. Switched to a negitive offset rim in 05.



What trucks have 8x170?


Bolt Pattern Chart

TRUCKYEARBOLT CIRCLE
Ford 3/4-ton Pickup (F-250)98-168X170mm
Ford 3/4-ton Pickup (F-250)17-Current8X170mm
Ford 1-Ton Pickup Single Wheel (F-350)79-988X6.5
Ford 1-Ton Pickup Dual Wheel (F-350)79-978X6.5



What year F250 is 8x170?


Applications Of The 8×170 Bolt Pattern In Different Vehicles
Primary Users: Ford F-250 to F-550 (1999-present) Ford Excursion (1999-2005)



Do Silverado and F150 have the same bolt pattern?


No, the F150 and Silverado spacers are NOT the same lug pattern. For example, the Ford F150 uses a 6x135mm bolt pattern while the Chevy Silverado uses a 6×139.7mm bolt pattern. If you would like to improve the off-roading performance, installing truck wheel spacers is a good idea.



Will a Ford bolt pattern fit a Chevy?


In simple terms, yes. Check that the spacing is correct to fit over break calibers (mostly anything over a 16in rim will) and wont rub the inside of the wheel well. If it is 4x4 also check your front locking hubs so that it fits over them, Chevy, Dodge, Ford, and Jeep trucks might have different sizes on these.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.