Where can I find my Toyota Tundra color code?
The exterior paint color code for a Toyota Tundra is typically a short alphanumeric string printed on a label near the driver’s door jamb; if it isn’t there, you can also find it inside the glove box, in the engine bay, or by using the VIN with a Toyota dealer or official portal.
Where to look for the color code
These are the most reliable locations where the color code is usually printed on a Toyota Tundra. The code is typically 2–3 characters long.
- Driver’s side door jamb sticker — the most common source. Look for a small field labeled Paint, PNT, or a similar designation, with a short alphanumeric code.
- Glove box or passenger-side area — on some model years, Toyota placed the label in the glove box or nearby interior panel.
- Engine bay data plate — on the radiator support or within the engine compartment near the firewall, depending on year and market.
- Under-hood or frame area near the hood hinge — in certain markets or trims, it may be found on a metal stamping or label in that vicinity.
Knowing the exact code helps you source the correct color for touch-ups, repair work, or a full repaint to match your vehicle.
What to do if you can’t locate the code
If the label is faded, missing, or you can’t find it, the following options can help you verify the color code.
Contacting a Toyota dealer or parts department
Provide your vehicle’s VIN and model year. The dealer’s parts or service department can pull the build data and confirm the exact paint code for your specific truck.
Using the VIN to verify the color
Many official portals, including Toyota’s owners site, allow you to look up vehicle specifications by VIN after you register. The color code is usually listed among the exterior color information. If you’re unsure, the dealer can cross-check the code against regional paint catalogs.
What to do with the color code once you have it
Use the code when ordering touch-up paint, spray cans, or when requesting color-matched panels from a body shop. Provide the code along with the year and trim to ensure an exact match, especially for metallic or multi-layer finishes.
Using the color code effectively
Share the color code with your paint supplier or body shop to ensure a precise match. In some cases, the dealer can also confirm whether a special edition color uses a unique color name or code mapping, which can be important for older or region-specific models.
Summary
For most Toyota Tundra owners, the color code is found on the driver’s side door jamb sticker and is a short alphanumeric string. If that label isn’t accessible, check the glove box or engine bay label, or retrieve the code via your VIN through a Toyota dealer or official portal. With the correct code in hand, you can order matching touch-up paint or coordinate with a body shop to preserve the truck’s original finish.
Can a Toyota VIN tell me the car's color?
Find your color
Your car's VIN gives you a lot of information about your vehicle, but it won't give you your paint code.
Can I use my VIN to find my paint code?
No, you cannot find your car's paint code by VIN alone, as the VIN is a unique vehicle identifier and does not contain the paint code. However, you can use the VIN to find the code by contacting the manufacturer or a dealership, or by looking for the paint code on a sticker in your car.
Where to find your paint code
- On a sticker inside the driver's door: Look for a sticker on the door jamb or B-pillar that contains terms like "EXT PNT" or "BODY COLOR CODE," says CarParts.com.
- On a label under the hood: Some cars have a sticker or placard with paint information in the engine bay, although it can sometimes be hard to read due to age and heat, according to AutoZone.com.
- In your owner's manual: The paint code is often listed in the service history or owner's manual for your vehicle, notes Holts Auto.
If you can't find the code on your car
- Contact the dealership: Provide the VIN to the manufacturer or an authorized dealer, and they can look up the exact factory paint color for you, says JustAnswer.
- Use online VIN decoding tools: Some online tools and websites can help you find paint codes, but you should always verify the code directly from your vehicle or a dealer for accuracy, as online tools may have inaccuracies, notes Partify.
Where is the Toyota paint code located?
The Toyota paint code is located on a sticker in the driver's side door jamb, which can be identified by the C/TR: inscription. The three-character code that follows C/TR is the paint code, for example, 1G3 or 218.
This video shows how to find the paint code on a Toyota Camry: 58sPhilly TomYouTube · Nov 6, 2021
Step-by-step guide
- Open the driver's side door to access the door jamb area.
- Look for the information sticker, which typically has details about the vehicle's build date, tire pressure, and options.
- Find the line on the sticker that starts with C/TR:.
- The three-character code immediately following C/TR: is your paint code. Ignore the trim code and any characters after the forward slash in the example format C/TR: 1G3/FH13.
This video shows how to find the paint code on a Toyota Prius: 1mhoohoohoblinYouTube · Jun 19, 2021
Where is the paint code on a Toyota Tundra?
The Tundra paint code is on a sticker inside the driver's side door jamb (the frame of the door opening). Open the driver's door and look on the pillar or jamb for the identification label, which contains information including the C/TR followed by a three-digit code that is your paint color.
This video shows how to find the paint code on a Toyota Tundra: 59sJoe Beermaster The Car MasterYouTube · Mar 29, 2019
- Locate the sticker: Open the driver's door to expose the door jamb or B-pillar.
- Find the information: Look for the identification label, which is often a sticker with a barcode.
- Find the code: The paint code is a three-digit alphanumeric code that follows "C/TR" on the sticker. For example, a code might look like C/TR: 1D4/FH13, where 1D4 is the paint code.
