Where do I find the TPMS reset button?
In most modern cars there isn’t a universal TPMS reset button. The system often relearns automatically after tires are inflated to the recommended pressure and the vehicle is driven. If a manual reset is required, it’s usually in a few common spots or accessible through the onboard menu.
Common locations for a TPMS reset control
Car makers place the relearn control in a handful of standard spots. Knowing these can save time when tires have been rotated or replaced.
- Under the steering column on the lower dash panel, sometimes labeled “TPMS,” “RESET,” or “RELEARN.”
- Inside the glove box or behind a small access panel near the fuse box, occasionally with a tiny button or pin-hole reset.
- In the center console area—inside a storage tray or near the gear selector—on some sedans and SUVs.
- Along the driver's side door jamb or the edge of the dash near the driver's seat, occasionally with the icon of a tire.
- In the trunk or cargo area near the spare-tire well in a few SUVs and trucks, mainly after tire service.
If you can't find the button, check your owner's manual or contact the dealer; the exact location varies by make, model, and year.
How to perform a TPMS reset (when required)
Follow these general steps to re-learn the TPMS if your vehicle requires a manual reset. Procedures can vary by brand, so consult your manual for model-specific steps.
- Ensure all tires are inflated to the recommended pressures, including the spare if you’re relearning with a four-wheel system in some models. Use a reliable tire gauge and check the door placard or owner’s manual for the correct values.
- Turn the ignition to the ON position (engine off) or start the vehicle as instructed by your manual. Access the TPMS relearn option via the instrument cluster, touchscreen, or a physical button, depending on the model.
- Initiate the relearn procedure by pressing and holding the reset button, selecting “RELEARN” or “TPMS” in the vehicle’s menu, or following the brand-specific instructions. The TPMS indicator may blink or hold steady to show relearn is in progress.
- Drive the vehicle at speeds of 30–50 mph (50–80 km/h) for 10–20 minutes or as directed by the manual. The system should register the current sensor IDs and complete the relearn.
- Confirm the warning light goes out and verify each wheel’s pressure readings in the display if your vehicle shows them. If the light remains on, repeat the steps or seek professional assistance.
Note: Many newer vehicles perform the relearn automatically after you inflate the tires to spec and drive normally, without needing a button press.
Brand-specific notes
Some brands have unique steps or rely on automatic relearn. For example, certain models from Toyota, Honda, Ford, and GM provide simple door-ajar-to-turn-on ignition steps or the use of a dedicated menu option, while luxury brands may require a dealership tool for sensor ID programming.
If you’re unsure, the best approach is to consult your owner's manual or contact a dealership or tire shop with TPMS relearn experience.
What to do if you still can't locate the button
When the button remains elusive, or you’ve rotated tires or replaced sensors, consider professional help. A service advisor can perform a TPMS relearn using the dealer scan tool, ensuring all sensors are correctly registered and the system functions as intended.
Summary
There is no universal TPMS reset button across all vehicles. In most cars, the system resets automatically after tires are inflated to the recommended pressures and driven. If a manual reset is required, it is usually located in a few common spots (steering-column area, glove box or fuse panel, center console, or door jamb) and may involve a dedicated relearn procedure in the vehicle’s menu. Always consult your owner’s manual for model-specific instructions, and seek professional help if the light remains on after attempting a relearn.
