Where is the BCM module on a Ford Ranger?
The BCM (Body Control Module) on a Ford Ranger is a crucial component that manages various electrical systems and functions within the vehicle. Its location can vary depending on the specific model year and trim level of the Ranger, but there are some general guidelines to help you find it.
Where is the BCM Located on a Ford Ranger?
The BCM on a Ford Ranger is typically located in one of the following areas:
- Under the dashboard, on the driver's side
- Behind the glove box
- In the engine compartment, near the firewall
The exact location may also depend on the year and model of your Ford Ranger. It's important to consult your vehicle's owner's manual or service documentation to determine the precise location of the BCM for your specific Ranger.
Identifying the BCM
Once you've located the general area where the BCM is likely to be, you can identify it by looking for a rectangular or square-shaped module that is typically secured to the vehicle's frame or wiring harness. The BCM may be labeled with the text "BCM" or "Body Control Module" on the module itself.
Accessing the BCM
Accessing the BCM may require removing or partially disassembling certain components, such as the dashboard or glove box, depending on its location. It's important to follow the appropriate safety precautions and refer to your vehicle's service manual for detailed instructions on how to access the BCM safely.
By understanding the typical location and identification of the BCM on a Ford Ranger, you can more easily locate and access this critical component when necessary for maintenance, repair, or diagnostic purposes.
What are the symptoms of a bad BCM Ford?
- Electronics Refuse to Work or Don't Work Right. These include turn signals, windshield wipers, headlights, cabin lights, and power windows.
- Lights Flashing Randomly.
- Vehicle Refuses to Lock or Unlock.
- Warning Lights on the Dashboard.
- The Vehicle Refuses to Start.
What is a BCM Ford Ranger?
Ford Ranger Body Control Module (BCM)
A critical component of your vehicle, the BCM controls various electrical systems, such as lights, windows, and alarms.
How to reset BCM on Ford Ranger?
There's a temporary charge that's often stored in the BCM capacitors that needs to be discharged to perform the reset. Touch the disconnected battery cables together, being sure not to touch the battery posts at this time. It should only take a few seconds.
Where is the BCM module located?
The Body Control Module (BCM) is typically located inside the vehicle, often behind the dashboard on the driver's side, under the center console, or behind the glove box. Its exact position varies by make and model, and it can sometimes be integrated into the fuse panel or located in the passenger-side kick panel.
This video shows the location of the BCM module on a Fiat: 59sElectrical Car Repair LIVEYouTube · May 27, 2022
- Behind the dashboard: The BCM is frequently found on the driver's side, near the steering column or the center console.
- Under the center console: Another common location is underneath the center console.
- Behind the glove box: Some vehicles, like certain BMW models, have the BCM located behind the glove box.
- Integrated with the fuse panel: The BCM may be built into or connected to the main fuse box.
- In the kick panel: The BCM can be found in the kick panel, often on the passenger side.
This video shows the location of the BCM module in a 2013 BMW 5 series: 58sAuto Repair GuysYouTube · Oct 28, 2022
