Where is the flasher relay on a 2012 Ford Transit Connect?
The flasher relay is typically located in the engine bay, inside the under-hood fuse/relay box on the driver's side. The exact relay slot is indicated on the box lid’s diagram, usually labeled HAZARD or FL. If it isn’t found there, check the interior fuse panel behind the driver’s kick panel for a secondary location.
Where to look first: the under-hood fuse/relay box
Most 2012 Transit Connect models place the flasher relay in the engine bay’s main fuse/relay box. The box cover has a diagram showing each relay code, with the flasher often labeled HAZARD or FLASHER. This is the quickest place to start when diagnosing a failing or non‑operating flasher.
Under-hood fuse/relay box location
Note the typical footprint: a black plastic box mounted in the engine bay on the driver’s side, near the battery or strut tower. Access is gained by removing the cover, which reveals a labeled diagram for each relay and fuse.
- Open the under-hood fuse/relay box and locate the diagram on the inside of the lid.
- Identify the relay labeled HAZARD or FLASHER.
- Pull the relay straight up to remove it; inspect or replace as needed.
- If replacing, ensure the replacement relay is firmly seated in the socket.
In most vehicles, this approach resolves or narrows down the flasher issue quickly since the hazard and turn-signal functions share this relay.
Alternate location: interior fuse panel
If the relay isn’t found in the engine bay, Ford sometimes routes flasher duties through an interior panel or the body control module area. In these cases, you’ll use the interior diagram to locate a relay labeled HAZARD or FLASHER, or you may find the flasher managed by the IPDM/BCM rather than a separate plug-in relay.
Interior fuse panel checks
The interior panel is typically located behind the driver’s side kick panel or under the dash. The panel cover or a diagram inside the panel will indicate the flasher relay position or a related relay in the circuit.
- Remove the kick panel cover to access the interior fuse/relay block.
- Consult the diagram on the panel to find the HAZARD/FLASHER relay position.
- Remove, inspect, or replace the relay if needed and reseat it firmly.
- Test the hazard lights to confirm proper operation after replacement.
If you discover that the flasher is integrated with the body control module rather than a discrete relay, testing and replacement may require a scan tool or professional service.
What to do if you still can’t locate it
Ford’s documentation can vary by market and production run, so some 2012 Transit Connects may differ slightly from the described setup. If you can’t find the flasher relay in either box, consult the owner’s manual fuse/relay diagrams, or reach out to a dealership or qualified auto technician for the exact diagram for your VIN.
Summary
For a 2012 Ford Transit Connect, start by checking the engine bay’s under-hood fuse/relay box for a relay labeled HAZARD or FLASHER. If it’s not there, inspect the interior fuse panel behind the driver’s kick panel where the flasher may be managed by the IPDM/BCM. Always verify with the diagram on the cover and replace with the correct relay to restore proper hazard and turn-signal function. If in doubt, seek professional assistance to avoid misidentifying related components.
Where is the flasher relay located?
The flasher relay is most commonly found behind the steering column, inside the fuse box, or under the dashboard near the driver's feet. To find it, listen for the "tick-tock" sound of the turn signal and follow the sound to its source, which is often where the sound is loudest or the vibration is felt.
This video shows how to locate and replace the flasher relay in a 2003-2004 Ford Explorer: 1mTodd's GarageYouTube · Aug 24, 2021
Location clues
- Listen and feel: Turn on your turn signal and listen for the "tick-tock" sound. Trace the sound to where it is loudest, which is often a sign of the flasher relay. You can also feel the vibration from the relay when the turn signal is on.
- Check the fuse box: Open the fuse box, which is often under the hood or under the dashboard. Check the back of the fuse box cover for labels that identify the flasher relay.
- Look behind the dash: The relay is frequently located behind a panel on the driver's side of the dashboard. You may need to remove trim pieces or a storage compartment to gain access.
- Check the footwell: In some vehicles, especially older models, the relay can be clipped underneath the dashboard near the driver's left foot.
This video shows how to locate the flasher relay behind the steering column in a 1997-2001 Jeep Cherokee XJ: 55sGetJeepingYouTube · Feb 23, 2015
What to do once you find it
- Turn off the car: Ensure the ignition is off before attempting to remove or replace anything.
- Remove the relay: Gently pull the relay straight out or use pliers if it is difficult to grasp.
- Replace the relay: If you are replacing it, insert the new relay into the socket, making sure it is oriented correctly.
- Test the function: Turn on the car and test the turn signals and hazard lights to ensure they are working correctly.
Are the flasher relay and turn signal relay the same?
A turn signal relay (also known as a flasher relay) is the electronic device that controls your car's turn signal lights. The clicking sound when you activate your turn signals usually comes from the turn signal relay.
What is the recall on the 2012 Ford Transit Connect?
Ford Motor Company is recalling certain model year 2011-2012 Transit Connect vehicles. The wiper arms may not be adequately riveted resulting in incomplete or inconsistent clearing of the windshield and possible detachment of the wiper arm.
Where is the flasher relay on a 2012 Ford Transit?
The flasher unit in a 2012 Ford Transit Connect XLT is typically located under the dashboard near the steering column or inside the fuse box. Symptoms of a faulty flasher include non-blinking turn signals or hazard lights. To troubleshoot, first check the fuse box for blown fuses related to the turn signals.
