Where is the fuel filter on a Dodge Durango?
The fuel filter on most Dodge Durango models is not a separate, serviceable part under the hood; it is built into the fuel pump module inside the gas tank. Access to the module is typically through an interior panel, and replacement usually involves the pump assembly rather than swapping a standalone filter.
This article explains where to find the filter on different Durango generations, what to expect when servicing the fuel system, and how to approach common fuel-system issues safely.
Durango fuel-filter layout by generation
Understanding how the Durango's fuel filtration is arranged helps determine whether you have a standard inline filter or a pump-module setup inside the tank.
- Modern Durangos (roughly 2011 model year to present): The fuel filter is integrated into the fuel-pump module inside the gas tank; there is no typical external serviceable filter you replace separately. Access is usually via an interior panel in the rear floor or cargo area, depending on trim and year.
- Earlier Durango generations (pre-2011): Some configurations used a traditional inline fuel filter along the fuel line, while others relied on a pump-module in the tank. Availability varied by engine option and market.
The takeaway is that most current Dodge Durangos do not have a user-servicable external fuel filter; service typically involves replacing the pump module if the filter element is suspected to fail.
Accessing the fuel-pump module and performing service
Because the filter is part of the pump assembly in the tank, any service involves dealing with the fuel system. Take proper safety precautions and, if unsure, seek professional help. Below are general steps used by technicians, not a DIY guide.
- Verify model year and engine configuration to confirm filter/pump arrangement.
- Relieve fuel system pressure and disconnect the negative battery cable to reduce risk of sparks.
- Access the pump module via the interior panel in the rear floor or under the rear seat, according to your Durango's design.
- Remove electrical connectors and the pump-retaining ring or screws as required by the module design.
- Inspect or replace the fuel-pump module as a unit; if the filter element is separate, replace it per service documentation (this is less common in modern Durangos).
- Reassemble, reconnect wiring, and reinstall the interior panel; re-connect the battery and test for proper operation and fuel leaks.
In practice, most owners will need a professional mechanic or dealership service to replace the fuel-pump module, since it includes the reservoir, fuel pump, and filter element in many generations.
Safety and maintenance notes
Working around the fuel system is hazardous. Always work in a well-ventilated area, keep sparks away, relieve fuel pressure, and follow all vehicle manuals. If you smell gasoline or suspect a leak, stop and seek professional help immediately.
Summary
For Dodge Durango models, the fuel filter is typically not a separate external unit in modern generations; it lives inside the fuel-pump module in the gas tank and is accessed via an interior panel. Older Durango versions may have used an inline filter, but this is less common in current vehicles. If you experience fuel-supply issues, diagnose the pump module as a whole rather than attempting to replace a standalone filter, and consult the factory service manual or a qualified technician.
What is the most common problem with Dodge Durangos?
Transmission Problems
Transmission issues are common in 2021-2025 Dodge Durango models. Many owners report hard shifting, transmission slipping, and overheating.
Where is the fuel filter on a 2013 Dodge Durango crew?
On this vehicle, the fuel filter is integrated into the fuel pressure regulator. It's located at the top of the fuel pump assembly, which is situated at the top of the fuel tank. To replace the filter/regulator, the tank will need to be dropped (the fuel pump does not need to be removed).
Where is the fuel filter on a Durango?
Fuel Filters
One is located at the bottom of the fuel pump module. The other is located inside the module.
Where is the fuel filter located?
The fuel filter is typically located along the fuel line underneath the vehicle, often near the fuel tank or along the frame rail. However, in some modern vehicles, it is integrated inside the fuel tank and is not a separate, serviceable part. To find the exact location, it is best to consult your vehicle's owner's manual.
You can watch this video to see the location of a fuel filter under the car: 58sVideojugYouTube · Jun 25, 2012
Common locations
- Underneath the vehicle: Look for a cylindrical canister along the main fuel line that runs from the fuel tank to the engine.
- Along the frame rail: This is a common location, often on the driver's side of the vehicle.
- Inside the fuel tank: Some newer cars have a fuel filter that is part of the fuel pump assembly inside the gas tank. This is often a non-serviceable part, meaning it is replaced only when the fuel pump is changed.
- Under the hood: In some cases, the fuel filter may be located in the engine compartment within the fuel line.
This video shows how to find a fuel filter in your car: 58sScotty KilmerYouTube · Mar 12, 2013
Tips for finding your fuel filter
- Check your owner's manual: This is the most reliable way to find the exact location for your specific make and model.
- Trace the fuel line: Follow the metal or rubber fuel line that runs from the fuel tank toward the engine. The filter will be inline somewhere along this path.
- Look for a canister: The filter is often housed in a small, metal or plastic canister with fuel lines connected to both the inlet and outlet sides.
You can watch this video to learn how to change a fuel filter: 1mMakeIt101YouTube · Jun 18, 2024
