Where is the OBD port on a 2017 Honda CRV?
The OBD-II diagnostic port on a 2017 Honda CR-V is located under the driver's side dash, in the lower footwell to the left of the steering column, behind a small removable panel.
Location and how to access
In this model year, Honda places the 16‑pin OBD-II port in the recessed area of the driver’s side lower dash. It’s typically hidden behind a slim plastic panel near the kick panel and left of the steering column. A flashlight can help you spot it, and you may need to gently pry the cover free.
Before you connect a scanner, gather these items and plan the access path:
- OBD-II scanner or code reader (Bluetooth or wired, compatible with OBD‑II)
- Flashlight or bright phone light to illuminate the panel area
- Trim removal tool or small flat-head screwdriver to release the panel if needed
- Owner’s manual or quick reference for your trim, in case the panel layout varies
With the panel removed, you should see the trapezoidal 16‑pin OBD-II connector. Connect your scanner with the ignition in the ON position and the engine off if you’re reading stored codes; live data can require the engine running depending on the device.
After use, snap the cover back into place to protect the dash and prevent dust intrusion.
Step-by-step access
To locate and access the port in a methodical way, follow these steps:
- Park safely, set the parking brake, and turn the ignition to ON with the engine off (or follow your scanner’s manual for live data).
- Look to the left side of the steering column near the pedal area for a small rectangular panel or cover in the lower dash/kick panel.
- Gently pry the panel loose using your fingers or a trim tool, taking care not to scratch the dash.
- Identify the 16‑pin OBD-II socket; it will be a trapezoidal connector labeled “OBD.”
- Plug your scanner into the port, then turn the scanner on and follow its prompts to read codes or view live data.
- When finished, disconnect the scanner, return the panel to its original position, and snap it shut.
If you can’t locate the port despite following these steps, consult the owner's manual or contact a Honda dealership or qualified technician for a quick hands-on check of your exact trim level and optional equipment.
Additional considerations
Note that some trims or aftermarket accessories can slightly modify the exact panel placement, but the general location remains the driver’s side lower dash, near the kick panel. Always exercise care when removing interior panels to avoid damage, and follow the scanner manufacturer’s safety guidelines when connected to a live electrical system.
Summary
For a 2017 Honda CR-V, the OBD-II port sits under the driver’s side dash in the lower footwell, behind a small removable plastic panel to the left of the steering column. Access typically requires a small amount of prying to remove the cover; once exposed, you can connect an OBD-II scanner with the ignition ON (engine off for stored codes) to diagnose or monitor vehicle data. Reattach the panel after use to keep the area clean and protected.
