Where is the Toyota TPMS reset button?

There isn’t a single universal TPMS reset button that works across all Toyota models. Some vehicles have a physical reset switch tucked away under the driver's dash or in the glove box, while newer models rely on the instrument cluster or Settings menu for a relearn, and many cars relearn automatically after inflating tires to the correct pressures and driving. The exact location and method depend on the model year and trim.

To help you navigate the possibilities, this guide highlights common button locations, typical reset procedures, and model-year variations you may encounter when working with Toyota Tire Pressure Monitoring System (TPMS) resets.

Common locations for a physical TPMS reset button

These are the locations where a dedicated TPMS reset button is most commonly found on various Toyota models. If your car does not have a visible button, the TPMS may be relearned through the Settings menu or automatically after inflation and driving.

• Under the steering wheel on the lower-left dash, near the kick panel. Some older models label the button as "TPMS" or "RESET."


• Inside the glove box, or on the underside of the glove box lid, especially on older or mid-range trims.


• On the center console or instrument panel close to the driver’s left side (near levers or the shift area) in certain years and trims.


• In newer Toyota models, there may be no physical button at all; relearning is performed via the Settings or TPMS option in the multi-information display (MFD).

Because button placement varies by model and year, always consult the owner's manual for your exact vehicle to confirm the location. If no button is present, the vehicle likely uses a software-based relearn path or automatic relearn after tires are inflated and driven.

How to reset TPMS on Toyota: step-by-step (common methods)

Most Toyota owners will use one of two common methods: a physical button reset (where available) or a software-based reset via the Settings menu. The steps below reflect typical procedures used in many models. Always consult your manual for model-specific instructions.

1. Inflate all tires to the recommended pressure listed on the driver’s door jamb placard or in the owner’s manual. Accurate tire pressure is essential for TPMS to function properly.


2. Turn the ignition to ON with the engine OFF (unless your model specifies a different sequence).


3. If your vehicle has a dedicated TPMS reset button, press and hold it until the TPMS indicator light in the instrument cluster blinks or goes out. In some models you may need to press and hold for 3–5 seconds or until a confirmation message appears on the dash.


4. Start the engine and drive at a steady speed (typically 50–60 mph / 80–100 km/h) for about 10 minutes to complete the relearn process. In many cars the light will go out once relearn is complete. Some models relearn automatically after a short drive.


5. If the light stays on after the drive, recheck tire pressures and inspect for damaged sensors or slow leaks. If issues persist, have a tire shop or dealership inspect the TPMS sensors and wiring.

In models without a physical reset button, or when using the Settings path, follow this alternate approach:

6. Navigate to Settings > Vehicle > TPMS on the instrument cluster or touchscreen. Select Relearn or Reset, then confirm. The system will guide you through the relearn process, which may require a short drive.

After completing the relearn, confirm that the TPMS light has gone out. If it remains illuminated, re-check tire pressures again and consider a professional TPMS inspection to rule out sensor faults or battery issues.

Model-specific notes

Because Toyota’s TPMS implementation has evolved across generations, exact button labels and locations differ. You might encounter labels such as TPMS, RESET, SET, or a small pinhole that requires a tool to press. Some recent Camry, RAV4, Corolla, and Highlander models emphasize Settings-menu relearns rather than a dedicated button. Always verify with your specific model year in the owner’s manual or Toyota’s official support resources.

Summary

In short, the Toyota TPMS reset button location is not universal. Look for a physical reset switch under the dash or inside the glove box on older models, or rely on the Settings/TPMS options on newer vehicles. Many cars relearn TPMS automatically after inflating tires to the correct pressures and driving at highway speeds. When in doubt, check the owner’s manual or contact a Toyota service professional for model-specific instructions.

Why does TPMS light on but tires are fine on Toyota?

One of the most common reasons for a TPMS light staying on despite the tires being properly inflated is a sensor malfunction. TPMS sensors are typically located inside the tire and can wear out or become damaged over time, particularly if you've hit a curb, driven through a pothole, or been off-road.

Where is the TPMS reset button on a 2016 Toyota 4runner?

The 2016 Toyota 4Runner does not have a physical TPMS reset button under the steering wheel like some other models; instead, the reset is performed through the dashboard's multi-function display. To reset the TPMS, you must first inflate all tires to the correct pressure, then turn the ignition on, navigate to "Vehicle Settings" on the instrument cluster, find the "TPMS" option, and hold the steering wheel button for "OK" until the light flashes three times. 
This video shows how to reset the TPMS light on a Toyota 4Runner using the dashboard display: 1manesthesiadreaminYouTube · May 30, 2024
Step-by-step reset instructions

1. Adjust tire pressure: Park your vehicle and set the tire pressure in all four tires to the recommended PSI found on the sticker inside the driver's side door jamb. 
2. Turn the ignition on: Start the car or turn the ignition to the "On" position without starting the engine (press the start/stop button once without your foot on the brake). 
3. Navigate the menu: Use the left and right navigation buttons on the steering wheel to go to the Settings cog icon on the multi-function display. 
4. Select "Vehicle Settings": Press the "OK" button and scroll down to "Vehicle Settings," then press "OK" again. 
5. Select "TPWS": Scroll to "TPWS" (Tire Pressure Warning System) and press "OK". 
6. Select "Tire Pressure": Choose the "Tire Pressure" option and press "OK". 
7. Initiate the reset: Continue to press "OK" until you see the TPMS light flash three times on the dashboard, indicating the reset has begun. 
8. Drive to complete the reset: Start driving the vehicle. The system will calibrate, and the light should turn off after about 30 minutes of driving at speeds over 25 mph. 

What to do if the light stays on

• If the light flashes for 60 to 90 seconds and then stays on, it indicates a malfunction with the TPMS itself and not just low pressure. 
• In this case, you should take the vehicle to a dealership or mechanic for service, as there may be a faulty sensor or another issue that needs professional diagnosis. 

You can also watch this video to learn about the components of a Toyota 4Runner's TPMS: 1mToyota MaintenanceYouTube · Dec 19, 2018

Where is the TPMS reset button on a Toyota Highlander?

Area close to the parking brake pedal. Once you spot it press and hold the button until the tire light on your dash blinks three times and you're. Done.

Where is the TPMS reset button on a 2015 Toyota Corolla?

Steps to Reset Your Toyota Corolla Tire Pressure Light
It is typically located beneath the steering wheel, near the driver's sidekick panel, or on the dashboard. Once you've found the TPMS reset button, press and hold it for approximately three seconds. You may need a pen or a similar tool to reach it.