Loading

Which Crown has a V8 engine?

In Toyota’s Crown lineup, the V8 engine has appeared primarily in the flagship Majesta variant, especially during the late 1990s and early 2000s. Today, the Crown lineup does not offer a V8 engine.


Historical context: Crown engineering and the V8


The Crown family began as a traditional executive sedan focused on reliability and smooth inline engines. The V8 option was reserved for the high-end Majesta line, introduced to compete with luxury sedans that relied on V8 powerplants. In those peak years, certain Majesta versions were equipped with a 4.0-liter V8 derived from Toyota’s V8 family, delivering a different power and refinement level compared with the standard Crown models.


What engine class and years?


The V8-equipped Crown Majesta models appeared primarily in the late 1990s to early 2000s, with the objective of providing luxury-grade performance within the Crown family. These were not the base Crown sedans, but the top-tier Majesta variants offered in select markets.


Current status: what you’ll find in today’s Crown


As of the 2020s and into the current generation, Toyota has not offered a V8 engine in the Crown lineup. Modern Crown variants emphasize turbocharged four-cylinder engines and hybrid powertrains, prioritizing efficiency and emissions compliance. If a V8 is essential, enthusiasts typically look to older Majesta models or consider Lexus platforms that used similar V8 powertrains.


Why the shift away from V8s in the Crown


Across the automotive industry, there has been a broad move toward downsized engines paired with turbocharging and electrification to improve fuel economy and meet stricter emissions standards. The Crown’s evolution mirrors this trend, with newer generations prioritizing advanced electronics, efficiency, and hybrid systems over large-displacement V8 power.


Summary


In short, the Crown that offered a V8 was the high-end Majesta variant from the late 1990s to early 2000s. The contemporary Crown lineup does not include a V8 option, reflecting broader industry shifts toward smaller, more efficient powertrains.

What year Crown Vic has a V8?


For its 1980 introduction, Ford produced the LTD Crown Victoria with two engines, both of them V8s: a 130 hp (97 kW) 4.9 L V8 (the previous 302, rounded up to 5.0 L by Ford) was standard, with a 140 hp (100 kW) 5.8 L V8 (351) as an option. The Ford C4 3-speed automatic transmission was paired to both V8 engines.



Which Toyota Crown has the best engine?


The Crown's 340-horsepower HYBRID MAX powertrain is a highlight. Available only on Platinum, the system pairs Toyota's hybrid system with a 2.4-liter turbocharged engine and 6-speed automatic transmission. Acceleration is really impressive - as is the 400 pound-feet of torque.



What Toyota Crown has a V8?


Majesta
The Majesta was a more luxurious variant of the Crown and was slightly wider and heavier, necessitating two engine choices: the 3.0-litre 2JZ-GE six-cylinder, which produced 169 kW (230 PS; 227 hp) and the 4.0-litre 1UZ-FE V8, which produced 191 kW (256 hp; 260 PS).



How much horsepower does a Crown Majesta 4.6 V8 have?


Under the bonnet, the 2009 Toyota Crown Majesta V8 4.6L houses a 4.6L V8 1UR-FSE engine producing 347 hp and 460 Nm of torque, paired with an 8-speed automatic transmission and rear-wheel drive for smooth and powerful performance.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.