Which engine oil is used in Ford EcoSport?
The Ford EcoSport uses different engine oils depending on the engine type and the market. In general, modern petrol EcoSport models call for synthetic oils in the 5W-20 or 5W-30 range, while diesel variants typically require 5W-30 or 5W-40. Always confirm the exact specification for your model year and region in the owner’s manual or Ford’s official service resources.
To understand how the oil choice varies, it helps to know the EcoSport’s common powertrains across regions. The model has been offered with turbocharged petrol engines, naturally aspirated petrol engines, and diesel options in different markets. Each engine family has its own recommended viscosity and specification, and Ford sometimes updates these requirements with new generations or regional service bulletins. The guidance below reflects typical practices observed in recent years, but you should verify for your specific vehicle.
Petrol engines
Oil recommendations for petrol EcoSport variants are usually tied to the engine in your car. Below are the typical grades used in many markets for the main petrol options.
- 1.0L EcoBoost petrol (three-cylinder) — commonly 5W-20 or 5W-30 synthetic oil. Oils should meet current API SN+/ILSAC GF-5 or newer standards, and must align with Ford’s specification for your model year and region. Check your manual for the exact requirement.
- 1.5L Ti-VCT petrol — commonly 5W-30 synthetic oil. As with the 1.0L EcoBoost, use oil that meets the latest API/ILSAC standards and Ford’s regional specification as indicated in your owner’s manual.
Exact grade and Ford specification can vary by year and market, so it is essential to follow the specification printed in your car’s manual or on Ford’s official support portal.
Diesel engines
Diesel EcoSport variants have distinct oil needs, typically skewed toward higher-performance synthetic oils suitable for diesel operation.
- 1.5L diesel (TDCi) — usually 5W-30 or 5W-40 synthetic oil, with API CJ-4/CK-4 or equivalent diesel specifications. The exact grade depends on the country and engine version; consult the owner’s manual or a Ford service advisor for your VIN.
Diesel oil requirements can differ from petrol ones, especially with newer emission-control systems. Always verify the exact specification for your vehicle.
How to confirm the right oil for your EcoSport
Use these steps to ensure you select the correct oil for your specific EcoSport.
- Check the owner’s manual for the exact viscosity and specification requirements for your engine and market.
- Inspect the engine oil filler cap, which often indicates the recommended viscosity (for example, 5W-20 or 5W-30) and may reference Ford’s specification.
- Visit Ford’s official service portal or contact a Ford dealer with your VIN to obtain the precise oil specification for your car.
- If in doubt and your manual is not available, choose a high-quality full-synthetic oil that meets API SN+/ILSAC GF-5 or newer and aligns with Ford’s regional specification.
- Keep service records noting the exact oil grade used, to help future maintenance decisions.
Following these steps helps ensure you’re using the correct oil, which supports engine performance and longevity across EcoSport generations.
Market-specific notes
Because the EcoSport has been sold in many regions, oil recommendations can differ by country due to climate, fuel quality, and emission regulations. For example, some markets with hot climates or heavy-duty driving may specify 5W-30 rather than 5W-20 for certain petrol engines, while other regions may emphasize 5W-40 for diesel variants. Always rely on the official manual or dealer guidance for your exact vehicle.
Summary
In short, the Ford EcoSport does not use a single universal oil. Petrol engines typically run on 5W-20 or 5W-30 synthetic oil, and diesel engines commonly require 5W-30 or 5W-40 synthetic oil, but the precise specification depends on your engine version and market. Always verify with the owner’s manual or a Ford service professional to ensure you’re using the correct lubricant for your specific EcoSport model and year.
Does Ford recommend synthetic oil?
Conventional oil is the least expensive option when you get an oil change. But regular oil may not be the best option for the long-term ownership of your vehicle in the synthetic vs. conventional oil debate. In fact, Ford highly recommends using full synthetic oil for your new Ford.
What kind of oil does a 2019 Ford EcoSport use?
The recommended oil for a 2019 Ford EcoSport is SAE 5W-20, which can be full synthetic, synthetic blend, or high mileage. For extremely cold climates where temperatures are below -29∘Cnegative 29 raised to the composed with power cap C−29∘𝐶 (-20∘Fnegative 20 raised to the composed with power cap F−20∘𝐹), you should use 0W-20 oil that meets the WSS-M2C947-A specification. The correct oil capacity is 4.5 quarts when replacing the filter.
For most conditions
- Oil viscosity: SAE 5W-20
- Type: Full synthetic, synthetic blend, or high mileage
- Capacity: 4.5 quarts (with filter)
For extremely cold climates (below -29∘Cnegative 29 raised to the composed with power cap C−29∘𝐶 / -20∘Fnegative 20 raised to the composed with power cap F−20∘𝐹)
- Oil viscosity: 0W-20
- Specification: Must meet WSS-M2C947-A
- Capacity: 4.5 quarts (with filter)
Can I use 5W-30 instead of 5w20 in my Ford Escape?
Oil viscosity is only really relevant when you're under manufacturer's warranty. After warranty you can use whatever you want. I have a 2017 which calls for 5W20, but I use 5W30.
Which engine is used in Ford EcoSport?
The Ford EcoSport offers two main engine options: a standard 1.0-liter turbocharged 3-cylinder (123 hp) and an optional 2.0-liter 4-cylinder (166 hp). The 1.0L engine is paired with front-wheel drive, while the 2.0L engine comes with all-wheel drive. Both engines are mated to a six-speed automatic transmission.
You can watch this video to learn about the Ford EcoSport's engine options, including the EcoBoost engine: 51sThe Car PlaceYouTube · Mar 30, 2025
Engine options
- 1.0L turbocharged 3-cylinder:
- Horsepower: 123 hp
- Torque: 125 lb-ft
- Drivetrain: Front-wheel drive (FWD)
- Towing Capacity: 1,400 lbs
- 2.0L 4-cylinder:
- Horsepower: 166 hp
- Torque: 149 lb-ft
- Drivetrain: All-wheel drive (AWD)
- Towing Capacity: 2,000 lbs
Other specifications
- Transmission: Both engines use a six-speed automatic transmission.
- Fuel Economy: The 1.0L engine gets an estimated 27 city/29 highway MPG, while the 2.0L engine is rated for 23 city/29 highway MPG.
This video provides a review of the Ford EcoSport, including details about the interior and performance: 51sWeBuyCarsYouTube · Nov 14, 2025
