Loading

Why is there no heat in my Chevy Cruze?

If you're experiencing a lack of heat in your Chevy Cruze, there could be a few potential causes. The good news is that many of these issues can be easily diagnosed and resolved. In this article, we'll walk you through the most common reasons for a Cruze's heating system failure and provide steps to troubleshoot and fix the problem.


Potential Causes of No Heat in a Chevy Cruze


There are several reasons why your Chevy Cruze may not be producing heat. Some of the most common causes include:



  • Low coolant level - The heating system in your Cruze relies on the circulation of hot coolant from the engine. If the coolant level is low, the system won't be able to generate sufficient heat.

  • Faulty thermostat - The thermostat is responsible for regulating the flow of coolant through the engine. If it's stuck open, the coolant won't reach the optimal temperature to heat the cabin.

  • Blocked or damaged heater core - The heater core is the heat exchanger that warms the air blown into the cabin. If it becomes clogged or damaged, heat won't be able to transfer effectively.

  • Faulty blower motor - The blower motor circulates the heated air from the heater core into the cabin. If the blower motor fails, you won't feel any heat.

  • Electrical issues - Problems with the wiring, fuses, or other electrical components in the heating system can prevent it from functioning properly.


To diagnose the specific issue with your Cruze's heating system, you'll need to methodically check each of these potential problem areas.


Troubleshooting Steps


Here are the steps you can take to troubleshoot and fix the lack of heat in your Chevy Cruze:



  1. Check the coolant level - Open the coolant reservoir and ensure the level is full. Top it up with the appropriate coolant mixture if needed.

  2. Inspect the thermostat - Remove the thermostat housing and check that the thermostat is opening and closing properly as the engine warms up. Replace it if it's stuck.

  3. Examine the heater core - Feel the heater hoses - they should be hot when the engine is warmed up. If they're cold, the heater core may be blocked or damaged.

  4. Test the blower motor - Turn on the blower and listen/feel for the motor running. If it's not working, you'll need to replace the blower motor.

  5. Check the electrical system - Use a multimeter to test for power at the various heating system components. Repair any wiring issues or replace faulty fuses.


By methodically working through these troubleshooting steps, you should be able to identify and resolve the root cause of the no-heat issue in your Chevy Cruze. If you're not comfortable performing these checks yourself, it's best to have a qualified mechanic diagnose and repair the problem.

Why is my Chevy not blowing hot air?


Malfunctioning Heater Blower Motor
The blower motor is responsible for pushing warm air from the heater core through the vents. If the blower motor isn't working properly, you may feel little to no airflow inside the cabin. A malfunctioning blower motor could be due to a blown fuse, electrical issue, or motor failure.



Why is my car not blowing hot air on heat?


Typically, there are three main reasons why your car's heater may not be working: a malfunctioning thermostat, a faulty heater core, or low coolant levels. The thermostat is responsible for regulating the temperature of your car's engine, but it also plays a crucial role in heating up the cabin.



What causes heat to stop working in car?


Low Coolant Levels
Insufficient coolant is a primary reason for heater malfunction. Coolant, also known as antifreeze, is vital to your vehicle's heating system. It moves through the engine, absorbing heat, and then flows through the heater core, warming the air that gets blown into your car's cabin.



How do I know if my Chevy Cruze thermostat is bad?


What Are the Signs of a Failing Thermostat?

  1. Overheating (or overcooling)
  2. Coolant leaking.
  3. Erratic temperature changes.
  4. Strange sounds.
  5. Heater problems.



How much does it cost to replace a thermostat in a Chevy Cruze?


between $419 and $442
The average cost for a Chevrolet Cruze Thermostat Replacement is between $419 and $442. Labor costs are estimated between $87 and $110 while parts are typically priced around $332. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.



Why is my car blowing out cold air when heat is on?


Heater core issues
[3] Either the coolant isn't traveling through the heater core correctly, the blower motor air isn't reaching the heater core or a clog is possibly blocking the heater core. It's important to resolve this issue as soon as possible, as it can damage your engine and lead to it overheating.



Why is there no heat coming out of my car vents?


Low coolant: Whether caused by a leak or water evaporation, low coolant is the most common source of poor heater output. Thermostat: A stuck-open thermostat prevents the engine (and coolant) from heating up. Heater core: A clogged heater core restricts coolant flow, giving up little or no heat.



How do I know if my thermostat is blown?


7 Ways to Tell Your Thermostat Is Broken

  1. The Thermostat Has No Power.
  2. The AC or Furnace Won't Turn On.
  3. The Heater or AC Won't Turn Off.
  4. The Thermostat Reading Doesn't Match the Room Temperature.
  5. The Thermostat Doesn't Respond.
  6. The HVAC System Is Short Cycling.
  7. The Thermostat Forgets Programmed Settings.



Is it expensive to fix a car heater?


Fixing the issue yourself won't set you back more than a few hundred dollars at worst, but if you need to take your car to a mechanic, you can expect to pay for parts and labor up to $1,000, perhaps more, depending on the year, make, and model of your car.



Why is cold air coming out when the heater is on?


The heat exchanger uses coils to transfer heat from the ignited gas to the air. When cold air blows from a furnace the heat exchanger, furnace burner, or exhaust are likely the cause. This may be due to dirty components, broken parts, or the many safety mechanisms within the gas system.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.