Will a sheet of plywood fit in a Honda Ridgeline?
As a seasoned auto service professional at Kevin's Autos, I often get questions about vehicle capacities and practical uses. One common inquiry is whether a standard sheet of plywood will fit in a Honda Ridgeline. This is an important consideration for DIY enthusiasts, contractors, and anyone who frequently transports large materials. Let’s dive into the details to answer this question thoroughly.
Understanding the Dimensions of a Standard Sheet of Plywood
A standard sheet of plywood measures 4 feet by 8 feet (48 inches by 96 inches). This size is commonly used in construction and home improvement projects. To determine if it will fit in a Honda Ridgeline, we need to compare these dimensions with the truck bed's specifications.
Honda Ridgeline Truck Bed Dimensions
The Honda Ridgeline is known for its versatile and innovative truck bed design. Here are the key dimensions of the truck bed:
- Width between the wheel wells: Approximately 50 inches
- Width of the bed (excluding wheel wells): About 60 inches
- Length of the bed with the tailgate closed: 64 inches (5 feet 4 inches)
- Length of the bed with the tailgate down: Approximately 83 inches (6 feet 11 inches)
These dimensions indicate that the Ridgeline's bed is wide enough to accommodate the 48-inch width of a plywood sheet, even between the wheel wells. However, the length of the bed with the tailgate down is slightly shorter than the 96-inch length of a standard plywood sheet.
How to Transport a Sheet of Plywood in a Honda Ridgeline
While the Ridgeline's bed cannot fully enclose a standard sheet of plywood, it is still possible to transport it safely. Here are some tips:
- Use the tailgate: Lower the tailgate to extend the bed length to 83 inches. The plywood will overhang slightly, but this is manageable with proper securing.
- Secure the load: Use ratchet straps or bungee cords to secure the plywood to the truck bed. The Ridgeline has built-in tie-down points to make this easier.
- Consider the in-bed trunk: The Ridgeline features a unique in-bed trunk that can be used to store smaller items, keeping the plywood flat and stable.
- Drive carefully: When transporting oversized loads, drive at moderate speeds and avoid sudden stops or sharp turns to ensure safety.
By following these steps, you can transport a sheet of plywood in a Honda Ridgeline without any major issues.
Conclusion
In summary, a standard sheet of plywood will fit in a Honda Ridgeline, but it will require the tailgate to be down and some overhang management. The truck's wide bed and innovative features make it a practical choice for hauling large materials like plywood. If you have any further questions about vehicle capacities or need assistance with your truck, feel free to reach out to Kevin's Autos for expert advice and service!
Frequently Asked Questions
Is Honda discontinuing the Ridgeline?
For the 2026 MY, the Ridgeline will carry on in its current generation as Honda's 2025 Outlook mentions nothing about a new generation. That's despite them redesigning the MDX, Pilot and now Passport on the updated Light Truck platform.
What are the dimensions of a 4x8 sheet of plywood?
48 inches by 96 inches
A 4x8 sheet of plywood measures 48 inches by 96 inches. The dimensions refer to its length and width; the thickness can vary but is typically available in 1/4, 1/2, and 3/4-inch sizes. For further dimensional insights on plywood and other building materials, check out my Quora Profile!
Can you fit a sheet of plywood in a Honda Odyssey?
With the Odyssey's third-row seat folded down and the second-row seats removed, Honda says that a 4x8-foot sheet of plywood will fit inside the Odyssey. With the front console removed 10-foot 2x4 studs will fit.
Can a sheet of plywood fit in an SUV?
Seriously, even contractors will often have plywood delivered to job sites now rather than load and unload it themselves. So, most SUVs aren't designed to carry a flat sheet of plywood. Only the biggest, full-sized rigs based on pickup trucks will do that, along with some minivans with two rows of seats removed.
How to transport plywood in a pickup?
before you put the wood in your truck put a strap down underneath all the wood. next you take each end of the strap and cross them over each other just like this. lock them in place. and crank it down. this way all the wood is held together. and the straps are pulling it down so it's not gonna shift side to side.
How much can a Honda Ridgeline bed hold?
The Honda Ridgeline has a maximum payload capacity of 1,583 pounds. The truck bed has a cargo volume of 33.9 cubic feet, giving you plenty of space to load up camping gear or sports equipment.
How do you carry a 4x8 sheet of plywood?
And put a large loop in each end hook the loops over the lower corners of the sheet. And you can carry it around by just holding the rope.
Will a 4x8 sheet of plywood fit in an Explorer?
Whether fitted with second-row Captain's Chairs or bench, the Explorer will swallow up a 4×8 sheet of plywood. And thanks to the flat floor, you don't need to worry about more delicate items, such as a sheet of drywall sitting on a pressure point and cracking.
Can a Honda Ridgeline carry a sheet of plywood?
The Ridgelines bed is long enough and big enough to hold pretty much anything you need. The bed is 5'4" by 5," and the flatbed space between the wheel wells is 4'2" wide. If you need to haul 4x8 sheets of wood to drywall, you should have no problems at all.
Will a 4x8 sheet of plywood fit in an expedition?
Ford Expedition MAX
Nearly a foot longer than the traditional Expedition, it has roughly 17 more cubic feet of cargo space. In fact, it can even carry 4x8-foot sheets of plywood with the liftgate closed. Aside from the added cargo space, the Expedition MAX makes passenger space more comfortable, too.
