Are all Honda bolt patterns the same?
No. Honda uses more than one bolt pattern depending on the model and year. The two patterns you’re most likely to encounter are 4x100 mm and 5x114.3 mm. Always verify the exact bolt pattern for your specific vehicle before buying wheels or adapters.
Patterns you’re likely to see
The patterns commonly found on Honda and Acura vehicles across generations are listed below. There are exceptions for certain regions, trims, or rare editions.
- 4x100 mm (four lugs on a 100 mm bolt circle) — widely seen on many older and smaller Honda models such as Civics and Integras.
- 5x114.3 mm (five lugs on a 114.3 mm bolt circle) — common on many mid-size Hondas, SUVs, and most Acura models across various years.
Note that some rare or region-specific models may use different patterns; always confirm with official specifications for your exact year and model.
How to confirm your bolt pattern
To avoid mismatches when sourcing wheels, determine the exact bolt pattern for your car using reliable sources and precise measurements.
- Check the owner’s manual or the manufacturer’s official specifications for your exact year/model.
- Count the lug holes on the wheel hub (4 or 5).
- Measure the bolt circle diameter by measuring center-to-center across from opposite lug holes (in millimeters): 100 mm for 4x100 or 114.3 mm for 5x114.3.
- Check the hub bore size and whether hub-centric rings are needed for a proper fit.
- When purchasing wheels, verify the product specs list the correct bolt pattern (and lug size) for your vehicle; consult a professional if unsure.
Once you’ve confirmed the correct bolt pattern, you can source wheels that fit properly and maintain safe handling and braking performance.
Additional considerations when swapping wheels
Even with a matching bolt pattern, you must consider hub bore, offset, center bore, brake clearance, wheel width, and load rating. Mismatches can lead to rubbing, vibration, or unsafe driving conditions. If you use adapters or rings, ensure they are high-quality and installed by a qualified technician.
Summary
Honda does not rely on a single wheel bolt pattern across all models. The most common configurations are 4x100 mm and 5x114.3 mm, with some rare exceptions. Always verify the exact bolt pattern for your model and year before purchasing wheels, and account for hub bore, offset, and clearance to ensure a safe, proper fit.
