Can you fit a queen mattress in a Ford Expedition?

Yes. A queen-size mattress (60 x 80 inches) can usually be transported in a Ford Expedition, but not always flat in every configuration. With the rear seats folded and careful maneuvering, most drivers can fit it by angling the mattress and sometimes removing additional obstructions. This article explains how to maximize interior space and what to expect depending on model year and seating setup.

What you should know about the space inside a Ford Expedition

Ford Expeditions are large, three-row SUVs designed for carrying people and cargo. The usable cargo length grows substantially when the second-row (and sometimes the third-row) seats are folded flat, but the available width is constrained by wheel wells and interior panels. A queen mattress is wide enough to spill over these typical constraints if you go lengthwise and/or diagonally, but you may not be able to lay it perfectly flat in all configurations. The takeaway: plan around length first, then work with the available width by angling the mattress as needed.

Practical steps to fit a queen mattress

Before attempting the move, understand the steps to maximize your chances of success. The following sequence helps you organize the packing and reduces the risk of damage to the interior.

• Fold or collapse the second-row seats fully and, if possible, fold the third row as well to open the cargo floor.


• Clear the cargo area of loose items and protect the floor with blankets or moving padding to prevent scuffs.


• Position the mattress on its edge or at a slight angle along the longest available dimension, then slide it toward the front of the vehicle as you lower it in.


• If the mattress is too wide to lay flat between wheel wells, tilt or rotate it to occupy the lengthwise space while using the width diagonally where feasible.


• Keep the mattress away from sharp edges and interior components; use straps or rope to prevent shifting during transport.


• Enlist a second person to help maneuver the mattress, particularly when feeding it through the tailgate and aligning it with the floor.

Using these steps can improve your odds of fitting a queen mattress inside the Expedition without disassembly or damage to the interior.

Model-year considerations and practical tips

Different model years and seating configurations can influence how easily a queen mattress fits. The Expedition’s cargo space expands when rear seats are folded, but the interior width is still shaped by wheel wells and side panels. Here are practical considerations to keep in mind, especially if you’re planning a move or a long trip.

• Width constraints: Expect wheel wells that intrude into the cargo width; a 60-inch-wide mattress may require angling rather than laying flat.


• Length considerations: With two rows folded, you typically gain enough length to accommodate the 80-inch mattress, though precise fit depends on seat configuration and whether front seats are moved forward.


• Weight and handling: A queen mattress can be heavy; use proper lifting technique and protective gear to avoid injury.


• Alternatives if it won’t fit: If the mattress won’t fit flat, consider renting a larger moving vehicle, using a pickup with a camper shell, or temporarily deflating an air mattress for transport as a backup plan.


• Safety first: Do not obstruct the driver’s vision or critical controls; secure the mattress so it cannot shift into the cargo area while driving.

In practice, most Ford Expedition owners who need to move a queen mattress find that folding the rear seats and angling the mattress allows them to transport it in one trip, especially with a helper and protective padding.

Summary

For most users, transporting a queen mattress in a Ford Expedition is feasible when you fold down the rear seating, protect the interior, and angle the mattress to fit the available length and width. Width constraints posed by wheel wells are the primary challenge, but careful maneuvering and a second pair of hands often make it work. If you anticipate a tight fit, plan for alternatives or a secondary vehicle to ensure a smooth move.

How to transport a queen mattress in a SUV?

Put the mattress on top of the car first, then put the box spring on top of that. Cover the box spring with cardboard and then use rope to tie it to your car. This protects the car from damage. Make sure your doors are open (not just windows) when you tie it down or you won't be able to get in the car :)

How big is the back of a Ford Expedition with the seats down?

Maximum Cargo Volume (All Rear Seats Down): With both the second and third rows folded flat, the standard Expedition yields up to 108.5 cu ft of cargo space, whereas the Expedition MAX boasts a cavernous 123.1 cu ft.

Which SUV can fit a queen mattress?

Can I Fit a Queen Mattress in My Car? You'd be surprised. A queen mattress could potentially fit in an SUV or a van. Cars like a Subaru Forester or Honda Odyssey are popular choices for such tasks.

Can a Ford Explorer fit a queen size mattress?

Yes, a queen mattress can fit in a Ford Explorer, but you must fold the second and third-row seats down and may need to fold the mattress. With the back seats folded down, the Explorer has enough cargo space to accommodate the length and width when the mattress is folded in a "taco" shape.
 
This video demonstrates how to load a queen mattress into a Ford Expedition, which is larger than an Explorer but shows the process of fitting a queen mattress: 53sUse a Pickup Truck Inc. Furniture MoversYouTube · Apr 7, 2016
How to fit a queen mattress in a Ford Explorer

• Fold down all rear seats: Flip down the second and third-row seats to create the largest possible flat cargo area. 
• Fold the mattress: Bend the mattress in half lengthwise to make it easier to maneuver and fit inside the vehicle. 
• Secure the mattress: You may need to use ratcheting tiedowns to secure the mattress and prevent it from shifting during transport. 
• Check compatibility: Note that a standard queen mattress is about 60" x 80". You should still measure your specific vehicle to ensure a proper fit, especially considering the wheel wells and other interior shapes. 

This video demonstrates how to move a mattress by yourself: 1mClutter Reduction Junk RemovalYouTube · Jan 6, 2025