Did Chevrolet make a 292 engine?
In short: No — Chevrolet did not produce a factory-engine displacement officially labeled 292 cubic inches. The 292 CID figure does not appear in Chevrolet’s standard engine catalog. This article explains how Chevrolet’s engines are categorized and why the 292 number can cause confusion.
Understanding Chevrolet’s typical engine families
Over decades, Chevrolet’s powerplants fell into a few core families. The inline-six family included smaller displacements such as 216, 235, and 261 cubic inches, used in various passenger cars and trucks. The company’s V8 lineup began with smaller displacements in the mid-260s and progressed to larger sizes, including commonly recognized numbers like 265, 283, 327, and 350 cubic inches for the small-block family. A separate big-block family encompassed even larger displacements, eventually reaching well into the 400–500 cubic inch range in the mid-20th century. These are the engine sizes most often cited in Chevrolet histories and collector materials.
Where the 292 figure sometimes pops up
References to a “Chevrolet 292” typically arise from confusion rather than from an official Chevrolet production engine. In many cases, the 292 CID label can be a misreading, a misattribution to a similar GM inline-six used in trucks, or a confusion with a Ford engine of the same displacement. When researching a specific vehicle, it’s important to verify the engine through the VIN, engine stamping numbers, and the original build documentation rather than relying on a single catalog entry or online label.
What to verify when researching an engine displacement
To determine the actual Chevrolet engine in a given car or truck, researchers should check several sources and indicators. Engine casting numbers and block casting numbers, which are stamped on the engine, can be cross-referenced with GM’s published documentation and reputable reference guides. The vehicle’s model year, trim, and assembly plant provide additional context to confirm which engine family (inline-six, small-block V8, or big-block V8) was installed at factory departure. When in doubt, consult multiple reliable sources or a Chevrolet historical archivist to confirm the exact displacement.
Summary
Chevrolet did not offer a production engine officially designated as 292 cubic inches. The brand’s engine lineup historically covered inline-sixes in the 216–261 range and a broad spectrum of V8 displacements from the 265–350 small-blocks up to the larger big-blocks in the 396–454 range. Any reference to a “Chevrolet 292” is most likely a mislabel, confusion with another GM line, or an erroneous catalog entry. If you’re investigating a specific model or year, share details and I can help verify the exact engine configuration.
What is the rarest V8 engine?
The L88 remains one of the rarest. And most coveted Corvette engines ever. Produced. 1965 Chrysler A990 race Hemi 203 units the 1965.
How to identify a 292 Chevy engine?
Thing see that fuel pump. There that fuel pump on a 250 is on this side of the motor mount on a 292. It's behind it. And the last thing is these side covers here these are for your lifter covers.
What is the rarest Chevy engine?
Chevrolet Z11 V8 Details
Chevrolet chose to discontinue its high-performance engine initiative in late 1963, completing only 57 units before shutting down production. This limited production run established the Z11 V8 as Chevrolet's rarest engine of all time.
How much horsepower does a 292 Chevy have?
Small block V8. They designed a new family of six-cylinders. That were lighter. More compact. And significantly more advanced The standout was the 292 inline 6 launched in 1963 With a bore of 3.875.
