How big is a Prado tank?
A Prado tank typically holds about 87–90 liters of fuel, depending on generation and market. In some regions, configurations can push the capacity toward around 95 liters.
The Toyota Land Cruiser Prado has varied fuel-tank capacities across generations due to design changes, engine options, and regional specifications. This article outlines the typical ranges and how to verify the exact capacity for your specific vehicle.
Tank sizes by generation and market
To illustrate how the figure has evolved, here are representative capacities by generation. These are typical values; exact capacity can vary by engine and configuration. Always check the vehicle’s placard or owner’s manual for your unit.
- 120 Series (2002–2009): commonly around 87 L (approximately 23.0 US gallons).
- 150 Series (2009–present): commonly around 88–90 L; many variants list 90 L (about 23.8 US gallons).
- Regional variants: in some markets, capacity may be closer to 95 L (about 25.1 US gallons) due to packaging or wheel/space considerations.
In practice, most Prado owners will find their tank sits in the high-80s to low-90s liters, with a few markets offering slightly larger capacities.
Why the numbers vary
Several factors influence the official capacity printed in brochures and manuals, including generation, market, and configuration choices.
Key factors
- Model year and generation
- Market-specific packaging and trims
- Spare wheel placement and interior layout
- Engine type (petrol vs diesel) and associated fuel-tank design
With these variables, the exact figure for a given vehicle is best confirmed from official sources such as the owner’s manual or the door placard.
How to verify your own Prado’s tank capacity
To obtain the precise capacity for your specific Prado, rely on official documentation and your vehicle’s markings.
- Consult the owner’s manual for the fuel-tank capacity in liters and gallons.
- Inspect the driver-side door jamb placard, which lists the official specification for your unit.
- If you have access to the VIN, use Toyota’s official resources or a dealer to pull the exact build sheet.
- Cross-check with the service or parts catalog for your trim and year if needed.
Conclusion: The placard and manual are the most reliable sources for the exact tank size of a given Prado.
Summary
The Toyota Land Cruiser Prado does not have a single universal fuel-tank size. Across generations and markets, the capacity typically ranges from about 87 to 90 liters, with some regional versions offering up to around 95 liters. For precise planning, always reference your vehicle’s manual, the door placard, or official Toyota spec sheets for your exact year, model, and market.
How many litres is a full tank in Prado?
The fuel tank is limited to 87 L, with no sub-fuel-tank system available.
What is the difference between 2.8 L and 3.0 L Prado?
With the shift to stricter Euro 5 emissions standards, Toyota retired the 3.0L engine and introduced the new 2.8L turbo-diesel (1GD-FTV). This engine was paired with a diesel particulate filter (DPF), which brought better fuel efficiency and lower emissions but also added maintenance complexity.
Does Toyota Prado have two fuel tanks?
The Prado 250's Fuel Capacity
This total capacity is split between an 80-litre main tank running down one side of the vehicle, and a 30-litre sub-tank on the other side.
How big is the gas tank on a 2007 Toyota Prado?
180 litre
A 180 litre fuel tank gives the Prado the legs to go almost anywhere, especially the diesel which has a touring range of more than 1500 km. The Prado is rated to tow up to 2500 kg.
