Did Mopar make a 400 engine?
The Mopar 400 engine is a significant part of automotive history, particularly for enthusiasts of Chrysler, Dodge, and Plymouth vehicles. Understanding its origins, specifications, and impact can provide valuable insights into the world of muscle cars and performance engines.
Overview of the Mopar 400 Engine
The Mopar 400 engine, also known as the Chrysler 400, was produced from 1972 to 1978. It is a big-block V8 engine that was part of Chrysler's B-series engine family. This engine was designed to deliver robust performance and was commonly found in various Chrysler, Dodge, and Plymouth models during its production run.
Specifications
The Mopar 400 engine features a number of key specifications that contributed to its popularity:
- Displacement: 400 cubic inches (6.6 liters)
- Configuration: V8
- Block Material: Cast iron
- Horsepower: Ranged from 250 to 360 hp, depending on the model and year
- Torque: Approximately 400 lb-ft
Applications
The Mopar 400 engine was used in a variety of vehicles, including:
- Chrysler New Yorker
- Dodge Charger
- Plymouth Road Runner
- Dodge Dart
- Plymouth Fury
Legacy and Impact
The Mopar 400 engine is often celebrated among classic car enthusiasts for its performance capabilities and its role in the muscle car era. While it may not be as widely recognized as the 426 Hemi, the 400 engine still holds a special place in the hearts of many car lovers. Its combination of power and reliability made it a popular choice for both street and racing applications.
In conclusion, the Mopar 400 engine is indeed a notable creation from Chrysler, representing a significant chapter in the history of American muscle cars. Whether you're a collector, a restorer, or simply an admirer of classic automobiles, the 400 engine is a fascinating topic worth exploring.
Frequently Asked Questions
Did Chrysler make a 400 engine?
Chrysler increased the bore size of the 383 to create the 400. Its bore of 4.342-inch (110.3 mm) was the largest used in any production Chrysler V8 at the date of its introduction. All parts except for the pistons were interchangeable between the 383 and 400. Crankshafts were made of cast iron.
What is the largest engine made by Chrysler?
The largest Chrysler engine ever built was the XIV-2220, or IV-2220. That was a 2,220 cubic inch, inverted, overhead cam, turbo-supercharged and intercooled V-16 Hemi engine designed for aircraft use in 1944.
What was the specs of the Mopar 400 engine in 1972?
Introduced in 1972, the Chrysler 400 V8 featured wedge-shaped cylinder heads, a single camshaft, and a pushrod-operated valvetrain. With a relatively low 8.2:1 compression ratio, the final 400 V8 version produced a mere 195 horsepower and 305 lb-ft of torque.
Was the 383 a good engine?
This results in a great balance of torque and horsepower output. The 383 block has lots of wall thickness, too." With torque and horsepower peaks of 3,900 and 5,200 rpm, the Muscle Motors 450 offers a gut-punching powerband that promises to perform just as well on the street as it does at the strip.
Did Pontiac make a 400 big block?
Pontiac differed from other GM Divisions and most other manufacturers in producing only a single sized V8 casting, rather than adding a larger big block to its line-up. The external dimensions of all their V8s, from 326–455 cu in (5.3–7.5 L) were the same.
What is the largest Mopar V8?
Commanding 7.2-Liter Unit Biggest Mopar V8 Ever
The 440, which featured a cast-iron block and heads, found refuge in pretty much every Plymouth and Dodge muscle car between 1965 and 1978 when it was retired. The most revered of the breed was the Six Pack variant, which was produced between 1969 and '71.
Did they make a 400 big block?
No - the small block was available in 400 CID - but the big block was never that exact size. 396 CID would be the most common engine “close” to that size - but the BBC also came in 402, 409, 427, 454……but not exactly 400 CID.
How much horsepower does a Mopar 400 have?
In this application, the 400 had a four-barrel carburetor, had the same 8.2:1 compression, and was rated at 195 horsepower and 305 pound-feet of torque.
Is the Mopar 400 a good engine?
The 400 is a great engine for a lot of reasons. Big bore helps not to shroud the valves. Very strong engine blocks. In fact they are the strongest stock block ever made outside the hemi. Low deck is easy to live with in a tight a body. Great rod ratio. For example: A 318 and 340 have a 6.123 rod and a 3.31 stroke.
Did Chevy make a 400 engine?
The 400 saw extensive use in full-size Chevrolet and GMC trucks; K5 Blazer/Jimmy, 1/2-ton, 3/4-ton, 1-ton, and even larger 'medium duty' trucks had an option to be equipped with a 400. The engine was available in midsize A-Body and full-size B-Body passenger cars until the end of the 1976 model year.
