Do Dodge Chargers have fuel filters?

Yes. Modern Dodge Chargers generally use an in-tank fuel pump with an integrated filter, and there is typically no separate, serviceable inline filter to replace. If problems occur, technicians usually replace the entire fuel pump module rather than a standalone filter. This article explains what that means for maintenance, diagnosis, and common questions about the Charger’s fuel system.

Filtration design in the Charger

In most Charger generations, the fuel filter is not a separate, user-serviceable part you replace on a routine schedule. Instead, the filter element lives inside the fuel pump module located in the gas tank, and it is paired with the pump itself. This design aims to protect the fuel injectors from debris and sediment as fuel is pumped to the engine.

Before you review the details, note that some earlier or regional configurations could differ, but the widely adopted setup for recent Chargers is an in-tank module with an integrated filtration element. Below is a concise overview of what this means for owners and technicians.

• In-tank fuel pump assembly includes a filter element or screen that protects fuel injectors.


• No widely used external inline fuel filter on most Dodge Charger models; the filtering function is built into the pump module inside the tank.


• Routine maintenance rarely involves replacing the filter separately; fuel-system health is tied to the pump, fuel quality, and injectors.


• If the filter or pump is failing, dealerships typically replace the entire pump module rather than just a filter.

Understanding this design helps explain maintenance guidance and repair options. Since the filtration is integrated, fuel quality and system cleanliness are important for long-term reliability, and symptoms of fuel-system trouble should be assessed promptly by a professional.

Maintenance and troubleshooting

For Charger owners, the key takeaway is that you’re unlikely to replace a standalone filter during routine service. Instead, pay attention to symptoms that point to the fuel delivery system and know how repairs are typically performed.

• Common signs of fuel delivery issues include hard starting, engine misfires, hesitation or stalling, reduced power, and declining fuel efficiency.


• Diagnostics often involve checking fuel pressure, inspecting for codes related to the fuel system, and confirming the fuel pump is delivering consistent flow.


• If a fault is confirmed, the typical repair is replacement of the entire fuel pump module inside the tank, not just a filter.


• Preventive measures include using quality fuel, avoiding contaminated fuel, and keeping the tank reasonably full to reduce sediment exposure to the pump.

In practice, this means Charger owners should monitor fuel system performance and rely on professional service for any suspected fuel delivery issue. The integrated design reduces the need for routine filter replacements but places emphasis on fuel quality and proper pump operation.

Year-by-year notes

Across generations of the Dodge Charger, the fundamental approach to filtration has remained consistent: an in-tank pump module with an integrated filtration element rather than a serviceable external filter. Some variations may exist by model year or engine option, so it’s always wise to consult the owner’s manual or a dealership for the exact configuration on your VIN.

To summarize, modern Dodge Chargers do have a fuel filtration system, but it is typically integrated inside the fuel pump module in the gas tank, not as a replaceable inline filter you would service at home. When issues arise, the standard repair path is to replace the entire pump module rather than swapping a separate filter.

Summary: Chargers rely on an in-tank fuel pump with an integrated filter, no routine external filter replacement is required, and repairs focus on the pump module and overall fuel system health. Maintaining good fuel quality and addressing symptoms early helps sustain performance and reliability.

What are the symptoms of a failing fuel filter?

Symptoms of a bad fuel filter include difficulty starting the engine, rough idling, stalling, poor acceleration, reduced fuel economy, and the check engine light coming on. A clogged filter restricts fuel flow, causing the engine to run poorly and potentially leading to further damage if not addressed. 
Performance issues

• Difficulty starting: The engine may crank but not start, or it may take longer to turn over because not enough fuel is reaching it. 
• Engine stalling: The vehicle may stall, especially when slowing down, idling, or under heavy load, due to insufficient fuel. 
• Rough idling or misfires: The engine may run unevenly, causing shaking at idle, or experience misfires, which can lead to a loss of power. 
• Hesitation and poor acceleration: The car may hesitate, stumble, or feel sluggish when you press the gas pedal, especially when accelerating or climbing a hill. 
• Loss of power: The vehicle may feel underpowered, particularly at high speeds or when carrying a heavy load. 
• Poor fuel economy: The engine works harder to pull fuel through a clogged filter, which can lead to decreased mileage. 

Other indicators

• Check Engine Light: The light may come on, often with codes related to a "lean condition," which means the engine is getting too much air and not enough fuel. 
• Fuel pump noise: The fuel pump may make unusual or loud noises as it works harder to push fuel through a clogged filter. 
• Fuel odor: A strong fuel smell can indicate a leak or that the engine is burning fuel inefficiently. 

How many filters are on a Dodge Charger?

two
There are two first air filters in your 2022 Dodge Charger.

Where is the fuel filter located on a 2015 Dodge Charger?

The fuel filter on a 2015 Dodge Charger is integrated into the fuel pump assembly, which is located inside the fuel tank under the rear seat. To access it, you must first remove the rear seat cushion to get to the fuel pump module, which is typically on the driver's side of the car. Because it's part of the fuel pump, the entire assembly needs to be replaced, not just the filter itself.
 
This video shows the location of the fuel pump assembly under the rear seat and how to access it: 57sLSE GroupYouTube · Jan 29, 2020
Fuel filter location

• Location: Inside the fuel tank, integrated with the fuel pump module. 
• Access point: Under the rear seat, usually on the driver's side. 

Why the filter isn't a separate part

• Modern vehicles like the 2015 Dodge Charger often use a "lifetime" filter that is part of the fuel pump assembly, meaning it is not designed to be replaced separately.
• When the filter becomes clogged, the entire fuel pump assembly must be replaced to fix the issue. 

How to access the fuel pump module

1. Depressurize the fuel system: Remove the fuel pump relay (number 21) and start the car to run until it stalls.
2. Disconnect power: Disconnect the negative terminal on the battery.
3. Remove the rear seat: Lift the rear seat cushion to access the cover.
4. Access the module: Remove the cover to expose the fuel pump assembly and its electrical connectors. 

This video demonstrates how to remove the rear seat to access the fuel pump module: 58sBoostedDaveYouTube · Sep 12, 2024

Does a 2014 Dodge Charger have a fuel filter?

The fuel filter is positioned in the line leading from the gas tank to the engine and prevents containments from getting inside the engine, which could lead to a loss in performance and potential damage to the cylinder lining.