What size socket is a 2017 Ford F-150 lug nut?
When it comes to maintaining or repairing your vehicle, having the right tools is essential. One common question among Ford F-150 owners is about the size of the socket required to remove or tighten the lug nuts. In this article, we’ll provide a clear answer and offer some tips for handling lug nuts safely and effectively.
The Correct Socket Size for a 2017 Ford F-150 Lug Nut
The 2017 Ford F-150 is equipped with lug nuts that require a 21mm socket for removal and installation. This size is standard for most F-150 models of this generation, ensuring a snug fit that prevents stripping or damage to the lug nuts.
Tips for Working with Lug Nuts
Handling lug nuts properly is crucial for both safety and the longevity of your vehicle’s wheels. Here are some tips to keep in mind:
- Use the Right Tools: Always use a high-quality 21mm socket and a torque wrench to ensure proper tightening. Avoid using tools that may damage the lug nuts.
- Check Torque Specifications: The recommended torque for the 2017 Ford F-150 lug nuts is typically around 150 ft-lbs. Always refer to your owner’s manual for the exact specification.
- Inspect Lug Nuts Regularly: Over time, lug nuts can become worn or damaged. Inspect them periodically and replace them if necessary.
- Loosen in a Star Pattern: When removing lug nuts, loosen them in a star pattern to evenly release tension on the wheel. This prevents warping or damage to the wheel hub.
- Re-Torque After Driving: After reinstalling wheels, it’s a good idea to re-check the torque after driving a short distance to ensure the lug nuts remain secure.
Why Knowing the Correct Socket Size Matters
Using the wrong socket size can lead to stripped lug nuts, damaged tools, or even unsafe driving conditions. By ensuring you have the correct 21mm socket for your 2017 Ford F-150, you can save time, avoid frustration, and keep your vehicle in top condition.
Conclusion
Whether you’re rotating your tires, replacing a flat, or performing other wheel-related maintenance, knowing the correct socket size for your 2017 Ford F-150 lug nuts is essential. With a 21mm socket and the right techniques, you’ll be well-equipped to handle the job safely and efficiently. If you have any questions or need professional assistance, don’t hesitate to reach out to Kevin’s Autos for expert advice and service!
Frequently Asked Questions
Is 19mm the same as 3/4?
Yes. 3/4″ is . 750″ and 19mm is 0.74803 Inches. Only 2 thousands of an inch difference.
What size socket for Ford F150 lug nuts?
To remove and install Ford F150 lug nuts, you'll need a 21mm socket. A standard 6-point 21mm socket is preferred over 12-point sockets since they grip better and are less likely to round off lug nuts. Make sure to use a torque socket.
What socket size are wheel nuts?
The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
Is 13 16 close to 22mm?
21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch. 24mm = just over 15/16 inch.
Is 13/16 the same as 21mm?
13/16 and 21 mm are very close and either will work. Like less than half a mm discrepancy. That's why it lists both. Technically the 13/16 is the smaller and more correct size.
What sockets for F150?
17, 19, 21, deep impact sockets. #1 & 2 Phillips small and large straight blade screwdrivers, eyeglass screwdrivers.
What size socket do I need to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size socket is a Ford F 150 lug nut?
To remove and install Ford F150 lug nuts, you'll need a 21mm socket. A standard 6-point 21mm socket is preferred over 12-point sockets since they grip better and are less likely to round off lug nuts. Make sure to use a torque socket.
What size socket is a 2017 Ford F150 lug nut?
To remove and install Ford F150 lug nuts, you'll need a 21mm socket. A standard 6-point 21mm socket is preferred over 12-point sockets since they grip better and are less likely to round off lug nuts.
What size socket for Ford wheel nuts?
The 19.5mm end fit the Ford swollen Lug Nuts perfectly.
