Do Toyota and Nissan have the same bolt pattern?
How bolt patterns vary between the brands
Bolt pattern, or PCD (pitch circle diameter), is determined by the number of lug holes and the diameter of the circle they form. Toyota and Nissan each use a mix of patterns depending on model and year, so compatibility is not guaranteed simply because two cars are from these brands. The most relevant fact is matching the exact pattern for your vehicle.
Common patterns encountered
These patterns appear on a broad range of models from both brands, though not universally. The following patterns are among the most frequently seen in everyday vehicles from Toyota and Nissan:
- 5x114.3 mm (5 lug holes on a 114.3 mm circle) – a widely used pattern on many mid- to large-model Toyotas and Nissans, and a common target for aftermarket wheels.
- 4x100 mm (4 lug holes on a 100 mm circle) – found on some smaller Toyota and Nissan models and on certain market variants.
- Other patterns exist on a smaller share of models, depending on generation and market (less common patterns may include 5x100, 5x120, etc.).
Because fitment is model- and year-specific, the patterns listed here describe common possibilities rather than a universal rule for every vehicle from either brand.
How to verify the bolt pattern for your vehicle
Before purchasing wheels, confirm the exact bolt pattern for your specific car and year. The steps below outline a reliable verification process.
- Open the owner's manual or consult the official manufacturer specifications for your model/year to find the lug pattern and hub bore.
- Examine the wheel hub or brake drum/rotor and count the number of lug holes on the wheel hub. Measure the distance between opposite lug holes to determine the bolt circle diameter (for example, 5 holes with 114.3 mm across equals 5x114.3).
- Measure the center bore of the wheel opening to ensure the wheel will seat properly on the hub without excessive play.
- Check additional factors such as wheel width, offset, and brake clearance to ensure full compatibility with your suspension and brakes.
- If in doubt, consult a professional at a dealership, tire/wheel shop, or a trusted aftermarket specialist who can verify pattern fitment for your exact vehicle.
Even when the bolt pattern matches, other factors like wheel offset, center bore size, and brake clearance matter. When compatibility is uncertain, using wheels specified for your vehicle or vetted aftermarket options is the safest route.
Practical implications and cautions
Trying to force wheels onto a vehicle with a mismatched bolt pattern is unsafe and can lead to wheel detachment or improper seating. Some dealers or shops may offer adapters or spacers, but these solutions introduce additional stresses and potential handling issues. Always prioritize exact pattern compatibility and proper seating over aesthetics or price.
Summary
Do Toyota and Nissan have the same bolt pattern? Not universally. They share some common patterns, especially 5x114.3 mm, but many models use different patterns such as 4x100 or other configurations. Always verify the exact bolt pattern for your specific model and year, and consult a wheel professional if you’re unsure.
