Does my 2013 Dodge Avenger have Bluetooth?
Yes—Bluetooth in a 2013 Dodge Avenger depends on the trim and options. Some cars from that year are equipped with Bluetooth via the Uconnect infotainment system, while base models or cars without the Uconnect package may not have it.
The 2013 Avenger used Chrysler’s Uconnect infotainment platform, and Bluetooth hands-free calling (and, in some configurations, limited audio features) was tied to the specific radio/option bundle installed at the factory. If your car has a touchscreen and a “Phone” or “Bluetooth” menu, you’re likely set up for Bluetooth. If not, you may need to confirm the exact options listed on the window sticker or in the owner’s manual to be sure.
Bluetooth in the 2013 Dodge Avenger: what to expect
Below are the common configurations you might encounter depending on trim and factory options. This helps you determine whether your vehicle likely supports Bluetooth and what it can do.
- Base models (often labeled SE or similar): Bluetooth is frequently not included unless the optional Uconnect Hands‑Free Phone package was added. If there is no Phone/Bluetooth menu, you probably don’t have Bluetooth built in.
- SXT and higher trims with Uconnect: Bluetooth hands‑free calling is commonly available as part of the Uconnect package, accessible via the steering wheel controls or the center display with a Phone/Menu option.
- Limited and other higher trims: Bluetooth is typically standard or widely available through the Uconnect system and paired through the on‑screen setup.
- Bluetooth audio streaming (A2DP) versus hands‑free voice calls: Some 2013 Avenger configurations focus on hands‑free calling; streaming audio from a phone is not guaranteed on all setups and may require a specific Uconnect version or radio.
If your Avenger has Bluetooth, you should see a “Phone” button on the dash or a Bluetooth/Phone option within the Uconnect menu, and you should be able to pair your phone for hands‑free calling.
How to check your car’s Bluetooth capability
Use the steps below to confirm whether your specific vehicle has Bluetooth and to set it up if available.
- Inspect the radio/center display for a “Phone,” “Bluetooth,” or “Uconnect” option and for a physical Phone button on the steering wheel or dash.
- Turn on the ignition and access the Uconnect or infotainment menu to look for a Bluetooth pairing or device list.
- Consult the owner’s manual or the original window sticker (Monroney label) to see if Bluetooth/Hands‑Free Phone was included with the vehicle’s options.
- If you’re unsure, contact a Dodge dealer with your VIN to verify which features were installed at the factory.
Once you locate the Bluetooth option, you can pair your phone by following on‑screen prompts, selecting your phone from the list, and confirming the pairing code if prompted. After pairing, you should be able to make hands‑free calls and, in some configurations, stream audio from your phone.
What to do if your Avenger doesn’t have Bluetooth
If your 2013 Dodge Avenger doesn’t have built‑in Bluetooth, you still have a few options. Aftermarket Bluetooth adapters and head units can add hands‑free calling and audio streaming, often with simpler installation than a full radio replacement. Alternatively, you can use a Bluetooth aux/receiver connected to the car’s AUX input (if equipped) for audio, though this won’t provide hands‑free calling. Check compatibility with your car’s wiring and your preferred audio setup before purchasing a kit.
Summary
Bluetooth in the 2013 Dodge Avenger is not universal and largely depends on trim level and factory options. If you have a trim with Uconnect and a Phone/Bluetooth menu, you likely have Bluetooth capable of hands‑free calling (and possibly occasional audio streaming). If not, you can verify with the VIN or window sticker, or consider aftermarket solutions if you want Bluetooth functionality.
Does the 2013 Dodge Avenger have Bluetooth?
What is new for the 2013 Dodge Avenger? The SXT Plus trim has been discontinued for 2013. Avenger trims have been upgraded with Bluetooth Technology as standard equipment this year. DVD Video System features are now available as options on select trims.
How to connect Bluetooth Dodge Avenger?
UCONNECT® PHONE PAIRING INSTRUCTIONS
- ON YOUR SMARTPHONE. Under Settings, press the Bluetooth® button and turn Bluetooth on.
- ON YOUR UCONNECT® TOUCHSCREEN. Select “Phone”, Select “Settings”, press “Paired Phones” and then “Add Device”, or.
- ON YOUR SMARTPHONE.
- ON YOUR UCONNECT® TOUCHSCREEN.
How to connect Bluetooth to uconnect 2013?
Which you will later need to enter into your cellular. Phone please say a four-digit PIN. Number 1 2 3 4 pen code 1 2 3 4 is this correct. Yes you can enter any four-digit PIN.
Does a 2013 Dodge have Bluetooth?
Turn the vehicle to the accessory. Position. So we'll hit the phone button here and just go from there navigate to the Bluetooth sync menu you connect device setup. Select one of the following. Device
