How big is a 1940 Ford Standard?
The 1940 Ford Standard is roughly 112 inches in wheelbase, about 193–195 inches long, around 68 inches wide, and weighs about 2,800–2,900 pounds, depending on body style and equipment.
The question covers the car’s overall footprint and weight, which depended on the specific body style and options. The Standard was Ford’s entry-level model for 1940, built on the traditional 1940 chassis and sharing many measurements with its late-1930s predecessors.
Overview of the 1940 Ford Standard
In Ford’s 1940 lineup, the Standard line was the affordable option with a few trim differences from more deluxe variants. The chassis and basic dimensions carried over from the late-1930s design, while styling received updates for the new model year.
Design and positioning
The Standard was configured for practical family transport, offering two- and four-door body styles and a focus on value rather than ornamentation. Dimensions remained in the same general range across the line, with only minor variations by body style.
Dimensions and weight
These figures summarize the main size metrics for most 1940 Ford Standard models. Note that some variation exists between body styles and optional equipment.
Overall footprint
- Wheelbase: 112 inches (284.5 cm)
- Overall length: approximately 193–195 inches (4.90–4.95 m)
- Width: about 68 inches (1.73 m)
- Height: approximately 63–66 inches (1.60–1.68 m)
- Curb weight: roughly 2,800–2,900 pounds (1,270–1,315 kg)
These size metrics reflect the typical configuration for the primary Standard body styles and representative trims, with slight differences possible due to door count and equipment packages.
Body styles and variants
For 1940, the Standard line encompassed a mix of two- and four-door configurations that kept pace with the period’s family-car expectations. The exact naming and availability could vary by market and dealership.
Two-door and four-door layouts were common, with the two-door club coupe and four-door sedans among the widely produced variants. Despite the different silhouettes, the underlying chassis shared the same wheelbase and many of the same dimensions.
- Two-door body styles (club coupe variants were popular)
- Four-door sedan styles
As with many classic cars, trim levels and optional equipment could alter the curb weight by a few hundred pounds, but the base footprint remained consistent across the Standard line.
Summary
The 1940 Ford Standard measured about a 112-inch wheelbase and roughly 193–195 inches in length, with a width around 68 inches and a curb weight near 2,800–2,900 pounds. Its size was typical for American family cars of the era, with minor variations by body style or equipment. In short, it offered solid, mid-sized dimensions suitable for its role as the affordable Ford of 1940.
