How deep is the bed of a Ford f250?
The bed sides on most Ford F-250 pickups are about 21 inches tall, with slight variation by year and bed length. In practical terms, the interior depth from the bed floor to the top edge is typically around 20.5 to 21.5 inches, depending on configuration.
The question of bed depth centers on what measurement people mean by "deep." In pickup terminology, depth usually refers to how tall the bed walls are (the interior vertical dimension from floor to the top of the bed sides) rather than the length of the bed. The Ford F-250 is offered with two bed lengths and various cab configurations, which can influence overall measurements but not dramatically change the bed wall height.
What the bed depth means for a Ford F-250
Bed depth can be interpreted in a couple of ways. Most commonly, it refers to the vertical height of the bed walls (how high the bed sides rise above the floor) and to the usable interior depth from the bed floor to the top edge. Here are the key facts that affect this measurement.
Typical bed side height and interior depth
For the Ford F-250, expect the bed side height to be around 21 inches (about 53 cm). The interior depth from the bed floor up to the top rail is usually in the 20.5–21.5 inch range, depending on the year, trim, and whether there are any bed accessories or liners that alter the perceived depth.
Important caveat: exact numbers vary by model year, bed length (6.75 ft vs. 8 ft), and cab configuration. Always check the specific truck’s measurements if you need a precise figure for a given vehicle.
Bed length options on the F-250
The bed length is a major dimension that influences cargo space length, but it does not drastically change the bed wall height. Ford typically offers two bed lengths on the F-250: a 6.75-foot bed and an 8-foot bed. Cab configuration (e.g., SuperCab vs. SuperCrew) can influence which bed lengths are available on a given model year.
- 6.75-foot bed (roughly 81.75 inches long)
- 8-foot bed (roughly 96 inches long)
Knowing the bed length helps with cargo planning, but the depth from floor to top edge remains in the similar range described above.
How to measure your own bed depth
If you want to determine the exact interior depth for your specific truck, you can measure it directly. The following steps guide you through a straightforward method.
- Park on a level surface and lower the tailgate to access the bed interior.
- Use a tape measure to measure from the bed floor up to the top edge of the bed side at the center of the bed, then repeat at the front and rear portions of the bed.
- Note measurements for areas around any wheel wells, as they can reduce usable depth in those zones.
- Record the smallest and largest measurements to understand the range of interior depth within your bed, and consider adding a bed liner or accessories if you need a precise clearance for tall items.
These steps will give you a reliable sense of the bed’s interior depth for your specific F-250, accounting for variations by year, bed length, and wheel-well intrusions.
Practical implications
Understanding bed depth helps with loading tall items, choosing a bed liner or tonneau cover, and planning for wheel-well clearance when stacking cargo. For example, a ~21-inch bed side height means you can expect roughly two feet of vertical clearance inside the bed before you reach the top rail, though actual usable height may be affected by tie-downs, liners, or other fittings.
Summary
In summary, the Ford F-250’s bed walls are typically about 21 inches high, with interior depth around 20.5–21.5 inches. The truck offers two bed lengths (6.75 ft and 8 ft), and the exact measurements can vary by year, trim, and cab configuration. For precise figures on a specific vehicle, measure the interior depth directly or consult the vehicle’s official specifications for that model year.
