What motor is in a 1982 Dodge D 150?
The 1982 Dodge D 150 was equipped with a 3.7-liter inline six-cylinder engine. This engine, known as the Slant Six, was a popular and reliable powerplant used in many Dodge and Plymouth vehicles throughout the 1960s, 1970s, and early 1980s.
Slant Six Engine Specifications
The Slant Six engine in the 1982 Dodge D 150 had the following key specifications:
- Displacement: 3.7 liters (225 cubic inches)
- Cylinder configuration: Inline six-cylinder
- Compression ratio: 8.0:1
- Horsepower: 95 hp at 3,600 rpm
- Torque: 170 lb-ft at 2,000 rpm
- Fuel system: Single-barrel carburetor
The Slant Six engine was known for its durability, simplicity, and fuel efficiency. It was a popular choice for light-duty trucks and vans like the Dodge D 150 due to its robust design and reliable performance.
Engine Placement and Design
The Slant Six engine in the 1982 Dodge D 150 was mounted at a 30-degree angle to the left, giving it the "Slant Six" nickname. This angled design allowed for a lower, more compact engine bay, which was beneficial for packaging in the truck's chassis.
The Slant Six engine featured a cast-iron block and cylinder head, providing excellent durability and heat dissipation. It also had a single overhead camshaft (SOHC) design, which was simpler and more reliable than a dual overhead cam (DOHC) setup.
Overall, the Slant Six engine was a well-engineered and dependable powerplant that served Dodge and Plymouth vehicles well for many years, including the 1982 Dodge D 150 pickup truck.
What engine is in a 1984 Dodge D150?
MMP Rating
| Engine Specifications | |
|---|---|
| Engine Options: | 3.7L Slant-6, 5.2L V8, 5.9L V8 |
| Displacement Range: | 225-360 cu in (3.7-5.9L) |
| Horsepower Range: | 95-230 hp (approximate) |
| Torque: | 170-325 lb-ft (approximate) |
How much is a 1986 Dodge D150 worth?
The value of a 1986 Dodge D150 1/2 Ton can vary greatly depending on its condition, mileage, options, and history. Typically, you can expect to pay around $14,367 for a 1986 Dodge D150 1/2 Ton in good condition with average spec.
What years are the Dodge D Series?
The D series (also called D/W series) is a line of pickup trucks that was sold by Dodge from October 1960 to September 30, 1993. The same basic design was retained until the October 1993 introduction of a completely redesigned Ram.
How many miles per gallon does a 1986 D150 get?
Based on data from 6 vehicles, 97 fuel-ups and 25,089 miles of driving, the 1986 Dodge D150 gets a combined Avg MPG of 13.26 with a 0.63 MPG margin of error.
What size engine is in the 1985 Dodge D150?
Engines-Chrysler's fuel-efficient 3.7 litre (225 CID) Slant-Six engine comes standard on D100 and W100 Misers as well as D150, W150 and D250 models. The proven, hard working 5.2 litre (318 CID) is standard on the W250, W350 and D350.
How long do Dodge 1500 engines last?
Typically, a Dodge RAM 1500 will last around 200,000-300,000 miles. With proper maintenance, repairs, and careful driving, you could see your Dodge RAM last on the higher end of the spectrum. Take care of your truck and it will care for you.
How many miles per gallon does a 1983 D150 get?
Based on data from 1 vehicles, 21 fuel-ups and 2,577 miles of driving, the 1983 Dodge D150 gets a combined Avg MPG of 12.55 with a 1.06 MPG margin of error.
What engine does a Dodge D150 have?
Performance-wise, the D150 was no slouch. With engine options that included robust V8s, it delivered ample power for hauling and towing.
How many miles per gallon does a 1982 Dodge D150 get?
Based on data from 2 vehicles, 221 fuel-ups and 55,150 miles of driving, the 1982 Dodge D150 gets a combined Avg MPG of 15.33 with a 0.31 MPG margin of error. Below you can see a distribution of the fuel-ups with 1 outliers (0.45%) removed.
What is the 318 Dodge Motor?
In the mid-1960s, Chrysler decided to adapt the 318 cu in (5.2 L) small block V8 into a lightweight, high output engine equally suited for drag strip or street performance use.
