How do I put my Ford EcoSport in 4 wheel drive?
To put your Ford EcoSport in 4 wheel drive, you'll need to locate the 4WD control switch or dial on your vehicle and engage it. This will activate the 4 wheel drive system and provide additional traction and control in off-road or slippery driving conditions.
Engaging 4 Wheel Drive on the Ford EcoSport
The Ford EcoSport comes equipped with an on-demand 4 wheel drive system that can be engaged when needed. Here are the steps to put your EcoSport in 4 wheel drive:
- Locate the 4WD control switch or dial, usually found on the center console or dashboard of your EcoSport.
- Make sure your vehicle is stopped or moving at a slow speed, typically under 25 mph.
- Rotate the 4WD control to the "4WD" or "4H" position to engage the 4 wheel drive system.
- You may feel or hear the 4WD system engaging as the front wheels begin to receive power.
- Once in 4 wheel drive, you can continue driving in this mode until you return the control to the 2WD or "2H" position.
It's important to note that the Ford EcoSport's 4 wheel drive system is designed for temporary use in off-road or slippery conditions. Prolonged use of 4WD on dry, paved roads can cause increased tire wear and fuel consumption.
When to Use 4 Wheel Drive on the EcoSport
The Ford EcoSport's 4 wheel drive system is best suited for the following driving conditions:
- Driving on unpaved roads, dirt, gravel, or mud
- Navigating through deep snow or ice
- Climbing steep hills or inclines
- Towing a trailer or heavy load
- Improving stability and control in wet or slippery conditions
By engaging the 4 wheel drive system when needed, you can enhance the EcoSport's off-road capabilities and provide better traction and control in challenging driving situations.
