How do I reset my Chevy Bluetooth MyLink?
Chevy MyLink Bluetooth can be reset with a quick system reboot, by clearing and re-pairing devices, or by performing a factory reset from the settings. The exact steps depend on your model year and MyLink version.
Quick soft reset to troubleshoot Bluetooth
The fastest fix is a soft reset that restarts the MyLink infotainment system without affecting your saved data.
- Turn on the vehicle and ensure the MyLink screen is active.
- Press and hold the volume knob (the power button) for about 10 seconds until the screen goes dark and the system restarts. Release when the Chevrolet logo reappears.
- Wait for the system to finish rebooting, then try reconnecting or re-pairing your device if needed.
A soft reset refreshes the MyLink software and is safe to perform when you’re experiencing minor glitches.
Re-pair and manage Bluetooth connections
If a specific phone won’t connect or keeps dropping, clearing the old pairing and re-pairing can fix the issue.
- On MyLink, go to Settings > Bluetooth or Phone > Paired devices.
- Select the phone and choose Forget or Delete to remove the pairing.
- On your phone, turn Bluetooth off and back on, then initiate pairing from the MyLink screen by choosing “Pair device” or selecting the car’s name in your phone’s Bluetooth list.
- Follow prompts on both devices to complete pairing.
Clearing the Bluetooth pairing and re-pairing often resolves stubborn connection or audio-handshake problems.
Factory reset and system-wide reset
- In MyLink, open Settings and look for System or General settings.
- Select Factory Data Reset, Restore Factory Settings, or Reset All Settings depending on your version, and confirm the action.
- Allow the system to reboot completely. Afterward, you’ll need to re-enter preferences and re-pair your phones.
- If you don’t see these options, some models may require the dealer or service visit to perform a full reset or software update.
Factory resets erase customized settings and all saved Bluetooth pairings, so treat this as a last resort and be prepared to reconfigure your preferences afterward.
Model-year and version variations
Chevrolet’s infotainment nomenclature and menus have changed across generations (MyLink, Infotainment System with MyLink, and later Infotainment 3/4). If you don’t see the exact menu labels above, look for similar terms like “Factory Data Reset,” “Restore Factory Settings,” or “Reset All Settings.” When in doubt, consult your owner’s manual or contact your local dealer for model-specific steps.
Additional tips and caveats
Other considerations can improve results: check for available software updates in Settings, ensure your phone’s software is current, and verify that Bluetooth is enabled on the phone. If problems persist after resets, it may indicate a hardware issue with the MyLink module or a need for a dealer diagnostic.
When to contact a dealer
If resets do not resolve Bluetooth issues, contact a Chevrolet dealer or GM tech support. Have your VIN, model year, MyLink version, and a list of affected phones ready. A professional evaluation can determine whether a software update, module replacement, or deeper diagnostics are needed.
Summary
Resetting Chevy Bluetooth MyLink can be done with a quick soft reboot, by clearing and re-pairing devices, or with a factory data reset for a complete restoration. Start with the least invasive option (soft reset), then move to re-pairing, and only perform a factory reset if issues persist. Always check for software updates and consult your manual or dealer for model-specific steps.
