How much oil does a 2008 Dodge Sprinter diesel take?
The 2008 Dodge Sprinter diesel van typically requires 5 to 6 quarts of engine oil for a full oil change. The exact oil capacity can vary slightly depending on the specific model and configuration of the Sprinter diesel.
Detailed Answer
The 2008 Dodge Sprinter is a popular commercial van that was available with a diesel engine option. The diesel-powered Sprinter models are known for their excellent fuel efficiency and towing capacity, making them a popular choice for businesses and tradespeople.
When it comes to the oil capacity for a 2008 Dodge Sprinter diesel, the typical range is 5 to 6 quarts. This is the amount of engine oil required to perform a full oil change on the vehicle. The exact oil capacity can vary slightly depending on the specific model, engine size, and other factors.
- The standard 2.1-liter diesel engine in the 2008 Sprinter typically requires 5 quarts of oil for a full oil change.
- Larger diesel engine options, such as the 3.0-liter V6, may require up to 6 quarts of oil.
- The oil capacity can also be influenced by factors like the presence of an oil filter extender or the use of a different oil type.
It's important to always refer to the owner's manual or consult with a professional mechanic to determine the exact oil capacity for your specific 2008 Dodge Sprinter diesel model. Using the correct amount of oil is crucial for the proper functioning and longevity of the engine.
What kind of oil does a 2008 Sprinter diesel take?
Oil 5W-30
If you are driving a gas engine Sprinter van, the recommended oil you need is Full Synthetic Motor Oil 5W-40. If you are driving a diesel engine Sprinter van, the recommended oil is Full Synthetic Motor Oil 5W-30.
How much oil does a 2008 Dodge Sprinter 2500 3.0 diesel take?
13.2 quarts
Oil Grade: SEO56
| Viscosity: | 5W-30, 5W-40 (All TEMPS) |
|---|---|
| Capacity: | 13.2 quarts (with filter). After refill check oil level. |
| Torque: | 22 ft/lbs (Oil Drain Plug) |
How much oil does a 2008 6.7 L Cummins take?
A 2008 6.7L Cummins engine holds 12 quarts of oil with a filter change. This applies to 2007.5-2018 models. It is recommended to use an API CJ/CK-4 oil, with 15W-40 as the standard viscosity, or 5W-40 synthetic in cold temperatures (below -18∘Cnegative 18 raised to the composed with power cap C−18∘𝐶 or 0∘F0 raised to the composed with power cap F0∘𝐹).
- Oil capacity: 12 quarts (11.4 liters) with filter change.
- Oil type: API CJ/CK-4 compliant.
- Viscosity:
- 15W−4015 cap W minus 4015𝑊−40: for temperatures above -18∘Cnegative 18 raised to the composed with power cap C−18∘𝐶 (0∘F0 raised to the composed with power cap F0∘𝐹).
- 5W−405 cap W minus 405𝑊−40: synthetic for temperatures below -18∘Cnegative 18 raised to the composed with power cap C−18∘𝐶 (0∘F0 raised to the composed with power cap F0∘𝐹).
- After refilling: Start the engine, run it to operating temperature, then shut it off and wait about 30 minutes for the oil to drain back into the pan before checking the level and topping off if needed.
How much oil does a Sprinter diesel engine take?
If you have a diesel Sprinter Van, the recommended oil is Full Synthetic Motor Oil 5W-30. Here are the oil capacities for each of the available Sprinter Van engines: 5 Cylinder Diesel: 10 quarts. 4 Cylinder Diesel: 13 quarts.
