How much oil does a 2017 Lexus NX take?
A 2017 Lexus NX typically takes about 4.8 quarts (4.6 liters) of engine oil with a filter. This figure applies to the two main powertrains offered that year, though exact capacity can vary slightly depending on the engine and whether the oil filter is replaced during the change. Always verify with the owner’s manual or the under-hood label for your specific VIN.
Engine options and oil capacities
The NX lineup for 2017 included two primary engines. While the official figures are very close between them, checking the manual ensures you have the precise amount for your vehicle.
- NX 200t (2.0-liter turbocharged inline-4): approximately 4.8 quarts (4.6 liters) of engine oil with filter.
- NX 300h (2.5-liter hybrid): approximately 4.8 quarts (4.6 liters) of engine oil with filter.
Note: The stated capacity is typical for a full oil change with a new filter. If you’re unsure whether your service included a filter change, plan to top up to the standard level after an initial check and consult your mechanic or manual for confirmation.
Oil type and maintenance intervals
Using the correct oil type and following maintenance intervals helps preserve engine health in both NX variants. Lexus typically specifies a 0W-20 full synthetic motor oil for these engines, though local conditions can influence the exact specification.
- Recommended oil: 0W-20 full synthetic (confirm the exact specification in your region’s manual).
- Maintenance interval: For normal driving with synthetic oil, plan oil changes roughly every 10,000 miles or 12 months, whichever comes first. Severe driving conditions may warrant shorter intervals as advised by your dealer.
- Top-off and checking: Regularly check the oil level with the dipstick and top up with the same oil if levels are low. Do not overfill.
Practical tips for owners
To ensure accurate oil checks, reset the oil-life monitor after changes and use a high-quality filter during full oil changes. If you’re unsure of the exact capacity, or if you’re changing the oil outside normal service intervals, consult the owner’s manual or a Lexus service professional for guidance tailored to your vehicle.
Summary
In short, a 2017 Lexus NX generally holds about 4.8 quarts of engine oil with a filter, regardless of whether you drive the NX 200t or the NX 300h. Use 0W-20 synthetic oil and follow the recommended maintenance schedule to keep the vehicle running smoothly. For the most precise figure, reference the owner’s manual or confirm with a Lexus service center based on your VIN and region.
How many quarts of oil does a Lexus NX take?
How much oil does a 2023 Lexus NX 350h take? A 2023 Lexus NX 350h takes 4.6 quarts of oil.
What kind of oil does a 2017 Lexus nx200t take?
The correct oil for a 2017 Lexus NX 200t is SAE 0W-20, which is a full synthetic oil that meets or exceeds the API/ILSAC standards for the engine. While 0W-20 is the recommended viscosity for all temperatures, a 5W-20 can be used temporarily if 0W-20 is unavailable, but the next oil change must be with 0W-20. The engine has a capacity of approximately 5.2 quarts with a filter change.
Key specifications
- Oil Type: Full synthetic SAE 0W-20
- Capacity: Approximately 5.2 quarts (with filter)
- Note on alternatives: If 0W-20 is not available, a 5W-20 can be used in an emergency, but you must switch back to 0W-20 at your next oil change.
- API/ILSAC: Ensure the oil meets the latest API and ILSAC specifications, such as API SP and ILSAC GF-6A, for optimal engine protection.
How many quarts of oil does a 3.0 V6 Toyota take?
5 quarts
Pour 5 quarts of 10W-30 automobile oil into the engine. Use one hand to stabilize the funnel to help prevent spills.
How much oil does a 2017 Lexus NX 2.0 take?
5.2 quarts (with filter). After refill check oil level. Torque: 30 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt.
