How do I turn off the hold button on my Chevy Aveo 2009?
If you own a 2009 Chevy Aveo, you may have encountered the frustrating issue of the hold button getting stuck or not functioning properly. Fortunately, there is a simple solution to turn off the hold button on your vehicle. In this article, we'll guide you through the steps to resolve this problem.
Identifying the Hold Button
The hold button on a 2009 Chevy Aveo is typically located on the steering wheel or the center console, near the radio or climate controls. It is often labeled with the word "Hold" or a similar icon, and it is used to temporarily pause the audio system or other vehicle functions.
Steps to Turn Off the Hold Button
- Locate the hold button on your 2009 Chevy Aveo. It may be on the steering wheel, center console, or near the radio/climate controls.
- Press and hold the hold button for 5-10 seconds. This should disengage the hold function and restore normal operation of the audio system or other affected features.
- If the hold button is still not functioning properly, you may need to reset the vehicle's electronics. This can be done by disconnecting the negative battery cable for a few minutes, then reconnecting it.
- If the issue persists, it's recommended to consult a professional mechanic or the Chevy dealership for further assistance.
By following these steps, you should be able to turn off the hold button on your 2009 Chevy Aveo and restore normal functionality to your vehicle's systems.
How many miles will a 2009 Chevy Aveo last?
The Aveo has all the requisite bells and whistles, like efficient handling and engine power, to accommodate all of your daily driving needs. According to reports, this car can last over 200,000 miles as long as you take good care of it.
What car replaced the Chevy Aveo?
Chevrolet Sonic
2011: The Aveo enters its final model year in North America with few changes, as it is replaced by the all-new Chevrolet Sonic for the 2012 model year, based on the Chevrolet Aveo that keeps its name in other countries.
Why is my electronic check on hold?
Banks place holds on checks to make sure that the check payer has the bank funds necessary to clear it. In addition to protecting your bank, a hold can protect you from spending funds from a check that is later returned unpaid. That's important because it could help you avoid accidental overdrafts and related fees.
What is the hold button on a Chevy Aveo?
With hold mode turned on, the automatic transaxle will stay in a specific gear range. Press the HOLD button on the shift lever console to turn on hold mode. Press the button again to turn off hold mode, and return to normal automatic transaxle operation.
Why is my auto hold light on?
The Auto Hold (ACTIVE) indicator light illuminates in the information display when the system holds your vehicle stationary. When in active mode, press the brake pedal and the Auto Hold button to switch Auto Hold off.
When was Aveo discontinued?
2011
Chevrolet discontinued the Aveo in the North American market after the 2011 model year. However, the Aveo continued production in other regions around the world under various names.
How often should you change a timing belt on a Chevy Aveo?
General Motors timing belt interval
| 1.0L | {28} |
|---|---|
| 1.5L | Replace Every 60,000 Miles |
| 1.6L (2004-07 Aveo) | Inspect Every 30,000 Miles; Replace Every 60,000 Miles |
| 1.6L (2008 Aveo) | Replace Every 60,000 Miles |
| 1.6L (2009-10 Aveo) | Replace Every 100,000 Miles |
Why is the hold button flashing on my 2009 Chevy Aveo?
If the HOLD mode light flashes on Your Chevy Aveo sometimes indicates a malfunction in the automatic transmission. The HOLD light can have something to do with the gears not shifting in the transmission. Some owners reported that after replacing the coil packs that the light went away.
Are there any recalls on the 2009 Chevy Aveo?
General Motors LLC (GM) is recalling certain model year 2009-2010 Chevrolet Aveo and 2009 Pontiac G3 vehicles. The vehicles may contain brake fluid which does not protect against corrosion of the valves inside the anti-lock brake system (ABS) module, affecting the closing motion of the valves.
Why is my hold light flashing?
flashing hold light usually means an electrical supply /charge fault have you tested the output of the alternator, the gearbox is very sensitive to voltage drop/change. alternator could have been cooked with hot exhaust gasses under the seat as it needs cool air to cool the diodes.
