How do I turn on cruise control on my Chevy Spark?
Turn on cruise control on a Chevy Spark only if your model is equipped with the feature. If it is, you activate it with the cruise control control on the steering wheel or a left-side stalk, then set your desired speed and adjust as needed. Note that not all Sparks include cruise control, especially the base trim.
Cruise control maintains your vehicle’s speed without you pressing the accelerator. The exact controls can vary by year and trim, so this guide covers common layouts and steps. If you’re unsure whether your Spark has cruise control, check the owner’s manual, window sticker, or ask your dealer.
Is cruise control available on your Spark?
In Chevrolet Spark models, cruise control availability and control location depend on the year and trim. Higher trims (and certain markets) often include cruise control as standard or optional, while some base configurations may not.
Where to look for the controls
Cruise control is typically found either on a steering-wheel cluster or on a left-side stalk behind the turn signal lever. Look for a button labeled CRUISE or an ON/OFF toggle, and for speed adjustments you’ll see SET, RES, CANCEL, or plus/minus (+/−) controls depending on your year and trim.
Steps to turn on and use cruise control
Follow these steps to engage cruise control on a Chevy Spark that supports the feature. Layout can vary by year and trim, but the process is generally the same.
- Drive at a steady speed on a safe, open road.
- Activate the cruise system by pressing the ON/OFF control. This may be a dedicated CRUISE button on the steering wheel or a switch on a left-side stalk.
- Set your speed by pressing SET or by moving the stalk to the SET/RES position; the system will maintain the current speed.
- Adjust speed as needed with the +RES (increase) or -SET (decrease) controls until you reach the desired pace.
- To cancel, press CANCEL, tap the brake pedal, or switch the cruise control OFF. The system will disengage but your current speed is no longer maintained.
- To resume a previously set speed, press RES or + after canceling or temporarily disengaging.
If you cannot locate cruise control controls on your Spark, your model may not be equipped with the feature. In that case, consult the owner’s manual or your Chevrolet dealer about availability or potential aftermarket options.
Safety and best practices
Use cruise control on highways or roads with steady traffic and good conditions. Avoid using it in heavy traffic, on winding roads, or in rain or snow. Keep both hands on the wheel and stay alert to road conditions and speed limits.
Summary
Cruise control on a Chevy Spark is available only on models that include the feature. If present, enable the system with the appropriate control on the steering wheel or left-side stalk, then set and adjust your speed. If your Spark lacks cruise control, it isn’t available on that car. Always refer to the owner’s manual for the exact layout and limitations for your year and trim.
How to set cruise control on Chevy Spark?
1. When your vehicle is stopped, hold the brake pedal and press the Set button. 2. Keep your foot on the brake and press the Resume/+ or Set/- buttons to set the cruise speed you want.
How to activate cruise control on Chevy?
Now I'm not talking about Chevy's ultra cruise self-driving system that's not what this is about this is not a self-driving. System this particular system still requires you to pay attention to the
Does the Chevy Spark LS have cruise control?
A big draw for the Spark is its affordable pricing, but the base LS trim doesn't have some features we think you'll want. As such, go with the 1LT trim. It's more expensive than the base LS, but it has desirable extras such as full power accessories (power windows, mirrors and locks), keyless entry and cruise control.
How do you enable cruise control?
To turn on cruise control, first accelerate to your desired speed, then press the "On/Off" button to activate the system, and finally press "Set" to lock in the speed. You should see an indicator light on your dashboard confirming the system is active.
This video explains how to use cruise control in a car: 57sAdvance Driving SchoolYouTube · May 8, 2019
Step 1: Turn on the system
- Locate the "On/Off" button, which is usually on the steering wheel or a stalk behind it.
- Press the "On/Off" button to enable the system. A "Cruise Main" message or an indicator light will appear on the dashboard, but the system is not yet active at a specific speed.
Step 2: Set your speed
- Drive at the speed you want to maintain.
- Press the "Set" button. On some cars, this is a physical button, while on others, it's a stalk you push down.
- The system is now active, and you can take your foot off the accelerator.
Step 3: Adjust and manage your speed
- Increase speed: Press and hold the "Resume" or "+" button to accelerate, or simply press the gas pedal until you reach the new speed and press "Set" again.
- Decrease speed: Press and hold the "Cancel" or "-" button to slow down.
- Cancel cruise control: Press the brake pedal or the dedicated "Cancel" button to temporarily disengage cruise control.
- Resume speed: To return to the previously set speed, press the "Resume" or "RES" button.
