How do I turn on fog lights in Honda City?
In most Honda City models, turn on the headlights to low beam, then activate the fog lights with the appropriate control—either the fog switch on the headlight dial or a dedicated button/stalk—depending on your model year and trim.
Integrated headlight switch with fog function
This common setup places the fog light control on the headlight switch itself. You typically engage fog lights by selecting low beams first and then activating the fog mode on the same control, with the exact action varying by generation and market.
How to turn them on
- Turn the headlight switch to the low-beam position (the standard headlight icon).
- Engage fog lights by either pressing the inner edge of the dial, pulling the knob outward, or rotating it to the fog symbol (often shown as a lamp with diagonal lines).
- Check the dashboard for the fog light indicator to confirm they are on.
Note: Fog lights typically operate only when the low-beam headlights are on; daytime running lights generally do not power them.
Dedicated fog light button or stalk control
Some trims and markets use a separate fog light switch or a stalk-mounted control. Look for a small fog icon on a button near the steering wheel or on the left-hand stalk.
Using the dedicated control
- Ensure the headlights are on low beam.
- Press the dedicated fog light button, or toggle the stalk to the ON position as required. The dashboard should illuminate the fog light indicator.
- If the indicator doesn’t light, consult the owner’s manual for the exact control sequence for your model year, or check the fuse/relay.
Note: In most generations, fog lights require the low-beam headlights to be on; some markets may differ slightly in operation due to regional lighting options.
Troubleshooting and tips
If fog lights won't turn on, try these checks first:
- Verify that the main headlights are on low beam; fog lights typically won’t activate with parking lights alone.
- Make sure the fog light switch or stalk is in the ON position.
- Inspect the fuse for the fog light circuit (often labeled FOG or similar) and replace if blown.
- Check the bulbs for burnout (common variants are H8/H11, depending on market) and replace if necessary.
- Look for related wiring or relay issues; persistent problems may require service at a Honda dealer.
If problems persist, refer to the vehicle’s owner’s manual or contact a dealer to confirm the exact procedure and components for your specific City model year and market configuration.
Summary
Fog lights in the Honda City are designed to enhance visibility in poor weather conditions. They are normally activated after turning on the low-beam headlights and depend on your generation and trim. Depending on your car, use either the integrated headlight switch or a dedicated button/stalk to turn them on. When in doubt, consult the manual or a dealer to confirm the correct procedure for your exact model and market.
