How do you relearn the TPMS on a 2015 Dodge Ram?
If you own a 2015 Dodge Ram, you may need to relearn the Tire Pressure Monitoring System (TPMS) at some point, such as after replacing the tires or the TPMS sensors. Relearning the TPMS is a straightforward process that can be done in a few simple steps. In this article, we'll guide you through the steps to relearn the TPMS on your 2015 Dodge Ram.
What is the TPMS?
The TPMS is a safety feature in modern vehicles that monitors the air pressure in each tire. It alerts the driver when the pressure in one or more tires drops below a certain threshold, which can help prevent tire blowouts and improve fuel efficiency. The TPMS on a 2015 Dodge Ram uses sensors installed in each wheel to monitor the tire pressure and transmit the data to the vehicle's computer.
Why Relearn the TPMS?
You may need to relearn the TPMS on your 2015 Dodge Ram for a few reasons:
- After replacing the tires or TPMS sensors
- If the TPMS warning light is on and the system needs to be reset
- If the TPMS sensors have been moved to different wheels
Relearning the TPMS ensures that the system can accurately monitor the tire pressure and provide accurate warnings to the driver.
Steps to Relearn the TPMS
Here are the steps to relearn the TPMS on your 2015 Dodge Ram:
- Ensure the tires are at the correct pressure: Check the driver's side door jamb sticker or the owner's manual for the recommended tire pressure for your vehicle.
- Park the vehicle and turn off the engine: Make sure the vehicle is parked on a level surface and the engine is turned off.
- Locate the TPMS relearn button: The TPMS relearn button is usually located under the dashboard or in the engine compartment. Refer to your owner's manual for the exact location.
- Press and hold the TPMS relearn button: Press and hold the TPMS relearn button for about 5 seconds until the TPMS warning light blinks or the horn honks, indicating that the relearn process has started.
- Drive the vehicle: Drive the vehicle for at least 10 minutes at a speed of at least 20 mph. This allows the TPMS sensors to communicate with the vehicle's computer and complete the relearn process.
- Verify the TPMS warning light: After the drive, check the TPMS warning light. If it is no longer illuminated, the relearn process was successful.
If the TPMS warning light remains on or blinks after the relearn process, there may be an issue with the TPMS sensors or the system itself. In this case, you may need to consult a professional mechanic for further diagnosis and repair.
